check / check-without-hardware (push) Successful in 6m45s
- README, CHANGELOG, RELEASE_NOTES, THIRD_PARTY_NOTICES and docs/*.md translated to English; cross-markdown anchors updated - C/C++/Python/shell comments and user-facing messages translated - identifiers, protocol names, commands and literals unchanged - native tests re-verified: 24/24 PASS; tpms_frame.py self-test PASS
67 lines
2.9 KiB
Markdown
67 lines
2.9 KiB
Markdown
# TPMS EG53MA4 Simulator 2.0.0-rc.1
|
||
|
||
**Release candidate — 2026-10-27. This is not a "validated" release.**
|
||
|
||
A diagnostic simulator of four Schrader EG53MA4 sensors for the ESP32-S2-MINI
|
||
(ESP32-S2FN4R2) + CC1101 433 MHz with an SMA antenna. The target profile
|
||
includes tests with an Opel Astra J Sedan 2016, but compatibility of the
|
||
specific car must be confirmed. Synthetic data can hide a tyre fault; do not
|
||
use while driving.
|
||
|
||
## Features
|
||
|
||
- four persistent, independent 24-bit IDs; 260 kPa by default for every wheel;
|
||
- OOK/Manchester 433.92 MHz, low configurable power from −10 dBm;
|
||
- Clone IDs and New IDs + LEARN FL→FR→RR→RL, SINGLE/diagnostics;
|
||
- NVS configuration over UART without recompilation, version/CRC/
|
||
validation/factory reset;
|
||
- button, LED, timeouts, deep sleep with RTC and optional hardware ACC;
|
||
- automated native/RF/build tests, Docker, and SHA-256 artifacts.
|
||
|
||
## Required hardware
|
||
|
||
ESP32-S2-MINI (ESP32-S2FN4R2), a CC1101 **433 MHz** 3.3 V module with an SMA
|
||
connector (e.g. ARD-CC1101-ANT), an antenna, a button, and decoupling. The LED
|
||
is built in. Target power from the cigarette-lighter socket: a car USB charger
|
||
or an LM317T with a 240/390 Ω divider and proper capacitors; the 12 V variant
|
||
requires input protection and tests. Full BOM/pinout: HARDWARE. Neither the
|
||
S2 Mini nor the LM317T is a validated automotive solution on its own.
|
||
|
||
## Installation and update
|
||
|
||
New installation: `bash tools/check_all`, then
|
||
`pio run -e esp32s2mini -t upload`.
|
||
Release images: `bash tools/package_release.sh`; addresses and flashing are
|
||
described in VALIDATION. Before a full flash, write down your IDs — the NVS
|
||
partition may be erased. Verify the configuration after a restart with `info`.
|
||
There is no migration from version 1.0 without NVS; enter the IDs in the
|
||
console once.
|
||
|
||
## Test results without hardware (2026-10-28)
|
||
|
||
- native: 24/24 PASS (after the hardware–firmware integration audit);
|
||
- full ESP32 build with `-Werror`: PASS;
|
||
- cppcheck: PASS, 0 defects;
|
||
- rtl_433: 64/64 reference records, 3/3 synthetic, 3/3 negative: PASS.
|
||
|
||
Exact commands and pinned commits: VALIDATION/PROTOCOL.
|
||
|
||
## Known limitations
|
||
|
||
- The real CC1101 emission, tail, power, and frequency were not measured.
|
||
- RTL-SDR with an antenna, consumption measurement, brownout, and the ACC
|
||
test were not performed.
|
||
- Clone IDs/LEARN with a car were not performed; OE 13506028 was not confirmed
|
||
for a specific VIN.
|
||
- The meaning of all flags remains unknown; there is no guessed low-battery
|
||
bit.
|
||
- The schedule is experimental, not confirmed as OE.
|
||
- The LM317T and power from the cigarette-lighter socket are not a validated
|
||
automotive design; with power only from an ignition-switched socket there
|
||
is no transmission after the ignition goes off — the car ECU does not
|
||
listen then anyway.
|
||
- Gitea Actions requires a working runner; local results do not mean CI PASS.
|
||
|
||
Until the HIL items in VALIDATION are checked off, the result remains a
|
||
release candidate.
|