Files
czcionka e183d23950
check / check-without-hardware (push) Successful in 6m45s
Docs and code: translate Polish comments, messages and documentation to English
- README, CHANGELOG, RELEASE_NOTES, THIRD_PARTY_NOTICES and docs/*.md
  translated to English; cross-markdown anchors updated
- C/C++/Python/shell comments and user-facing messages translated
- identifiers, protocol names, commands and literals unchanged
- native tests re-verified: 24/24 PASS; tpms_frame.py self-test PASS
2026-10-30 18:01:32 +00:00

35 lines
3.3 KiB
Markdown
Raw Permalink Blame History

This file contains ambiguous Unicode characters
This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.
# Release-v2 audit register
| Priority | Original problem | Repair criteria | Status / evidence |
|---|---|---|---|
| P0 | Guessed low-battery bit dependent on the emulator supply | no mask and no coupling; flags test | fixed; code grep and 20/20 native |
| P0 | MCP1703 + 24 V TVS described as automotive protection | remove the recommendation; requirements and a datasheet example | fixed in HARDWARE |
| P0 | Lack of physical compatibility evidence with the car presented too confidently | RC, explicit HIL, VIN/marking verification | documentation fixed; HIL still open |
| P1 | IDs/pressures/RF only via recompilation | NVS with a console, validation, version/CRC | fixed; test_settings and build |
| P1 | Monolith prevented testing timeouts/ACC | portable state machine, fake clock/radio | fixed; test_app_state |
| P1 | FSK in the base flow without evidence | OOK only in firmware/generator | fixed |
| P1 | PARKING_SHUTDOWN without a guaranteed ACC wake | remove it or guarantee waking | removed; every sleep has RTC |
| P1 | TX ended on time and TXBYTES, tail risk | MARCSTATE/underflow/limit | improved; requires HIL confirmation |
| P1 | Vectors mostly self-authored | four real recordings + independent rtl_433 | 64/64 PASS |
| P2 | Default LF without a validated front end | disabled by default, LEARN without LF | fixed |
| P2 | Intervals presented as OE | explicitly experimental | PROTOCOL/SETUP/POWER |
| P2 | No full single check/build artifacts | check_all, CI, Docker, package_release | added; results in VALIDATION |
| P2 | A console window after every RTC wake raises consumption | sleep right after the RTC cycle | improved; HIL measurement open |
| P2 | README inconsistent with behaviour | new Quick Start, one UI table | rewritten |
| P1 | Digital pull-up of button/LF does not work in deep sleep (EXT1, RTC_PERIPH off) | RTC pulls + HOLD before sleep | fixed in power.cpp; HIL wake still open |
| P1 | `nan` passed console validation (pressure/RF) and reached NVS | rejecting NaN/inf + native tests | fixed; `parse` + test_parse |
| P2 | ADC divider saturating above ~11.8 V — no 12–14.4 V reading | range up to ~16 V | fixed in config.h (R2 180 kΩ); requires measurement |
| P2 | Full release image with `40m` vs build header `80m` | flash parameter consistency | fixed in package_release.sh; header verification |
| P2 | Python model without temperature saturation (discrepancy with C++) | clamp 0–255 + self-test | fixed in tpms_frame.py |
| P3 | Negative checksum test exercised Manchester instead of the sum | invert the whole cell | fixed in test_tpms_frame |
| P3 | Wrong bit offsets in the PROTOCOL.md diagram | correct 72/96/104/112/120 | fixed |
| P1 | Scale of the pressure field `P` (2.5 kPa/bit) unverified — all captures have `P=0`, the car shows 284 kPa for 260 kPa | calibrate against the car display, fix the conversion and tests | fixed; scaling correction 2.73 kPa/bit (`P=95` for 260 kPa), HIL: 260 kPa → 260 kPa on the display; a second measurement point (e.g. 300 kPa) would confirm linearity in range |
## Open, requiring hardware
These cannot be closed by declaration: CC1101/tail/power/frequency
measurement, an RTL-SDR test with an antenna, consumption and brownout,
protected ACC, a Clone IDs/LEARN test with the specific Astra, and the design
and testing of automotive power. They are the checklist in `VALIDATION.md`
and they block the "validated" status.