Files
czcionka e183d23950
check / check-without-hardware (push) Successful in 6m45s
Docs and code: translate Polish comments, messages and documentation to English
- README, CHANGELOG, RELEASE_NOTES, THIRD_PARTY_NOTICES and docs/*.md
  translated to English; cross-markdown anchors updated
- C/C++/Python/shell comments and user-facing messages translated
- identifiers, protocol names, commands and literals unchanged
- native tests re-verified: 24/24 PASS; tpms_frame.py self-test PASS
2026-10-30 18:01:32 +00:00

3.3 KiB
Raw Permalink Blame History

Release-v2 audit register

Priority Original problem Repair criteria Status / evidence
P0 Guessed low-battery bit dependent on the emulator supply no mask and no coupling; flags test fixed; code grep and 20/20 native
P0 MCP1703 + 24 V TVS described as automotive protection remove the recommendation; requirements and a datasheet example fixed in HARDWARE
P0 Lack of physical compatibility evidence with the car presented too confidently RC, explicit HIL, VIN/marking verification documentation fixed; HIL still open
P1 IDs/pressures/RF only via recompilation NVS with a console, validation, version/CRC fixed; test_settings and build
P1 Monolith prevented testing timeouts/ACC portable state machine, fake clock/radio fixed; test_app_state
P1 FSK in the base flow without evidence OOK only in firmware/generator fixed
P1 PARKING_SHUTDOWN without a guaranteed ACC wake remove it or guarantee waking removed; every sleep has RTC
P1 TX ended on time and TXBYTES, tail risk MARCSTATE/underflow/limit improved; requires HIL confirmation
P1 Vectors mostly self-authored four real recordings + independent rtl_433 64/64 PASS
P2 Default LF without a validated front end disabled by default, LEARN without LF fixed
P2 Intervals presented as OE explicitly experimental PROTOCOL/SETUP/POWER
P2 No full single check/build artifacts check_all, CI, Docker, package_release added; results in VALIDATION
P2 A console window after every RTC wake raises consumption sleep right after the RTC cycle improved; HIL measurement open
P2 README inconsistent with behaviour new Quick Start, one UI table rewritten
P1 Digital pull-up of button/LF does not work in deep sleep (EXT1, RTC_PERIPH off) RTC pulls + HOLD before sleep fixed in power.cpp; HIL wake still open
P1 nan passed console validation (pressure/RF) and reached NVS rejecting NaN/inf + native tests fixed; parse + test_parse
P2 ADC divider saturating above ~11.8 V — no 12–14.4 V reading range up to ~16 V fixed in config.h (R2 180 kΩ); requires measurement
P2 Full release image with 40m vs build header 80m flash parameter consistency fixed in package_release.sh; header verification
P2 Python model without temperature saturation (discrepancy with C++) clamp 0–255 + self-test fixed in tpms_frame.py
P3 Negative checksum test exercised Manchester instead of the sum invert the whole cell fixed in test_tpms_frame
P3 Wrong bit offsets in the PROTOCOL.md diagram correct 72/96/104/112/120 fixed
P1 Scale of the pressure field P (2.5 kPa/bit) unverified — all captures have P=0, the car shows 284 kPa for 260 kPa calibrate against the car display, fix the conversion and tests fixed; scaling correction 2.73 kPa/bit (P=95 for 260 kPa), HIL: 260 kPa → 260 kPa on the display; a second measurement point (e.g. 300 kPa) would confirm linearity in range

Open, requiring hardware

These cannot be closed by declaration: CC1101/tail/power/frequency measurement, an RTL-SDR test with an antenna, consumption and brownout, protected ACC, a Clone IDs/LEARN test with the specific Astra, and the design and testing of automotive power. They are the checklist in VALIDATION.md and they block the "validated" status.