Files
czcionka e183d23950
check / check-without-hardware (push) Successful in 6m45s
Docs and code: translate Polish comments, messages and documentation to English
- README, CHANGELOG, RELEASE_NOTES, THIRD_PARTY_NOTICES and docs/*.md
  translated to English; cross-markdown anchors updated
- C/C++/Python/shell comments and user-facing messages translated
- identifiers, protocol names, commands and literals unchanged
- native tests re-verified: 24/24 PASS; tpms_frame.py self-test PASS
2026-10-30 18:01:32 +00:00

2.9 KiB
Raw Permalink Blame History

TPMS EG53MA4 Simulator 2.0.0-rc.1

Release candidate — 2026-10-27. This is not a "validated" release.

A diagnostic simulator of four Schrader EG53MA4 sensors for the ESP32-S2-MINI (ESP32-S2FN4R2) + CC1101 433 MHz with an SMA antenna. The target profile includes tests with an Opel Astra J Sedan 2016, but compatibility of the specific car must be confirmed. Synthetic data can hide a tyre fault; do not use while driving.

Features

  • four persistent, independent 24-bit IDs; 260 kPa by default for every wheel;
  • OOK/Manchester 433.92 MHz, low configurable power from −10 dBm;
  • Clone IDs and New IDs + LEARN FL→FR→RR→RL, SINGLE/diagnostics;
  • NVS configuration over UART without recompilation, version/CRC/ validation/factory reset;
  • button, LED, timeouts, deep sleep with RTC and optional hardware ACC;
  • automated native/RF/build tests, Docker, and SHA-256 artifacts.

Required hardware

ESP32-S2-MINI (ESP32-S2FN4R2), a CC1101 433 MHz 3.3 V module with an SMA connector (e.g. ARD-CC1101-ANT), an antenna, a button, and decoupling. The LED is built in. Target power from the cigarette-lighter socket: a car USB charger or an LM317T with a 240/390 Ω divider and proper capacitors; the 12 V variant requires input protection and tests. Full BOM/pinout: HARDWARE. Neither the S2 Mini nor the LM317T is a validated automotive solution on its own.

Installation and update

New installation: bash tools/check_all, then pio run -e esp32s2mini -t upload. Release images: bash tools/package_release.sh; addresses and flashing are described in VALIDATION. Before a full flash, write down your IDs — the NVS partition may be erased. Verify the configuration after a restart with info. There is no migration from version 1.0 without NVS; enter the IDs in the console once.

Test results without hardware (2026-10-28)

  • native: 24/24 PASS (after the hardware–firmware integration audit);
  • full ESP32 build with -Werror: PASS;
  • cppcheck: PASS, 0 defects;
  • rtl_433: 64/64 reference records, 3/3 synthetic, 3/3 negative: PASS.

Exact commands and pinned commits: VALIDATION/PROTOCOL.

Known limitations

  • The real CC1101 emission, tail, power, and frequency were not measured.
  • RTL-SDR with an antenna, consumption measurement, brownout, and the ACC test were not performed.
  • Clone IDs/LEARN with a car were not performed; OE 13506028 was not confirmed for a specific VIN.
  • The meaning of all flags remains unknown; there is no guessed low-battery bit.
  • The schedule is experimental, not confirmed as OE.
  • The LM317T and power from the cigarette-lighter socket are not a validated automotive design; with power only from an ignition-switched socket there is no transmission after the ignition goes off — the car ECU does not listen then anyway.
  • Gitea Actions requires a working runner; local results do not mean CI PASS.

Until the HIL items in VALIDATION are checked off, the result remains a release candidate.