This repository has been archived on 2026-11-06. You can view files and clone it. You cannot open issues or pull requests or push a commit.
Files
hassble-config/config.yaml
T
eigger ea44b2ef6c Update fuel_level configuration in config.yaml
Removed filters from fuel_level configuration and added publish settings.
2026-06-22 13:59:32 +09:00

105 lines
4.5 KiB
YAML

# HassBle Configuration File
#
# Host this config.yaml file in a Git repository (e.g., GitHub) and enter the RAW URL in the HassBle Android app.
# The app will download this configuration, decode BLE advertisements/sensors, and declare/update them in Home Assistant.
#
# Do NOT put any Home Assistant credentials (URL/Token) in this file. Enter them directly in the app.
version: 1
defaults:
publish:
on_change_only: true
min_interval: 10s
devices:
# ──────────────────────────────────────────────────────────────
# Path A: BLE Passive Scanning (Advertisements)
# ──────────────────────────────────────────────────────────────
- id: living_thermo
name: "Living Room Thermometer"
source: advertisement
match:
service_data_uuid: "181a"
sensors:
- key: temperature
device_class: temperature
unit: "°C"
state_class: measurement
source_field: service_data
decode: { offset: 6, length: 2, type: int16, endian: big, scale: 0.1 }
- key: humidity
device_class: humidity
unit: "%"
state_class: measurement
source_field: service_data
decode: { offset: 8, length: 1, type: uint8 }
- key: battery
device_class: battery
unit: "%"
source_field: service_data
decode: { offset: 9, length: 1, type: uint8 }
# ──────────────────────────────────────────────────────────────
# Path C: OBD (ELM327) over BLE
# ──────────────────────────────────────────────────────────────
- id: car_obd
name: "Vehicle OBD"
source: obd
obd:
service_uuid: "18F0"
tx_char_uuid: "2AF1"
rx_char_uuid: "2AF0"
tx_delay: 50ms
init_commands:
- "ATZ"
- "ATE0"
- "ATL0"
- "ATS0"
- "ATH0"
- "ATSP6"
sensors:
- { key: rpm, preset: rpm, update_interval: 1s }
- { key: speed, preset: speed, update_interval: 1s }
- { key: engine_load, preset: engine_load, update_interval: 1s }
- { key: throttle, preset: throttle, update_interval: 1s }
- { key: coolant_temp, preset: coolant_temp, update_interval: 10s }
- { key: intake_temp, preset: intake_air_temp, update_interval: 10s }
- { key: ambient_temp, preset: ambient_temp, update_interval: 30s }
- { key: battery, preset: battery_voltage, update_interval: 10s }
- { key: run_time, preset: run_time, update_interval: 5s }
- { key: odometer, preset: odometer, update_interval: 30s }
- key: fuel_level
preset: fuel_level
update_interval: 30s
publish:
deadband: 0.5
min_interval: 60s
# GM Extensions (mode 22)
- { key: gear, preset: gm_current_gear, update_interval: 1s }
- { key: prnd, preset: gm_prnd_status_alt, update_interval: 1s }
- { key: torque, preset: actual_torque, update_interval: 1s }
- { key: oil_pressure, preset: gm_oil_pressure, update_interval: 2s }
- { key: trans_temp, preset: gm_trans_temp, update_interval: 10s }
# ──────────────────────────────────────────────────────────────
# Path B: GATT Notify & Write (Bi-directional Control)
# ──────────────────────────────────────────────────────────────
- id: custom_meter
name: "Custom BLE Meter"
source: gatt_notify
gatt:
service_uuid: "ffe0"
notify_char_uuid: "ffe1"
write_char_uuid: "ffe2"
sensors:
- key: power
unit: "W"
device_class: power
state_class: measurement
decode: { offset: 0, length: 2, type: uint16, endian: little }
controls:
- key: relay
type: switch
command: { on: "A10100", off: "A10000" }