This repository has been archived on 2026-11-06. You can view files and clone it. You cannot open issues or pull requests or push a commit.
Files
hassble-config/config.yaml
T
eigger 94ddb8fdda Simplify OBD init command lists
Remove redundant OBD initialization commands (ATZ, ATE0, ATL0, ATS0, ATH0) from configs. config.yaml now only uses ATSP6 for the device, and templates.yaml clears init_commands for one template and sets only ATSP6 for the other. This reduces unnecessary reset/echo/linefeed commands and relies on explicit protocol selection.
2026-06-26 09:00:48 +09:00

138 lines
6.1 KiB
YAML

# HassBle Configuration File
#
# Host config.yaml and templates.yaml in a Git repository (e.g., GitHub).
# In the HassBle app: enter owner/repo and branch (e.g. eigger/hassble-config, main).
# The app loads config.yaml for the gateway and templates.yaml for Import template.
#
# Do NOT put any Home Assistant credentials (URL/Token) in this file. Enter them in the app.
version: 1
defaults:
publish:
on_change_only: true
min_interval: 10s
devices:
# ──────────────────────────────────────────────────────────────
# Path A: BLE Passive Scanning (Advertisements)
# ──────────────────────────────────────────────────────────────
# Jaalee JHT — instance_mode: mac → 스캔된 MAC마다 jaalee_jht_{MAC} 엔티티 자동 생성
# Ref: https://github.com/eigger/espcomponents/tree/master/components/jaalee_jht
# Temp/Humidity formula: https://sensor.jaalee.com/scan_api.html
#- id: jaalee_jht
# name: "Jaalee JHT"
# source: advertisement
# instance_mode: mac
# match:
# manufacturer_id: 76 # Apple Inc. (0x004C) — decimal 사용 필수 (hex 0x... 파싱 불안정)
# manufacturer_min_length: 24
# manufacturer_hex_prefix: "0215" # iBeacon 타입 마커 (0x02=subtype, 0x15=length 21)
# sensors:
# - key: temperature
# device_class: temperature
# unit: "°C"
# state_class: measurement
# accuracy_decimals: 2
# source_field: manufacturer_data
# decode: { offset: 18, length: 2, type: uint16, endian: big, scale: 0.002670288, offset_value: -45 }
# - key: humidity
# device_class: humidity
# unit: "%"
# state_class: measurement
# accuracy_decimals: 2
# source_field: manufacturer_data
# decode: { offset: 20, length: 2, type: uint16, endian: big, scale: 0.001524504 }
# - key: battery
# device_class: battery
# unit: "%"
# state_class: measurement
# source_field: manufacturer_data
# decode: { offset: 23, length: 1, type: uint8 }
# Parking beacon — instance_mode: shared → MAC 무관, manufacturer 0x035D 광고가 하나의 엔티티 공유
# payload 14바이트: [7..10]=월·일·시·분, [11]=배터리(역산), [12..13]=코드
- id: parking_beacon
name: "Parking Beacon"
source: advertisement
instance_mode: shared
match:
manufacturer_id: 861 # 0x035D
sensors:
- key: parking_time
device_class: timestamp
icon: mdi:clock-time-four-outline
source_field: manufacturer_data
length: 14
decode: { offset: 7, length: 4, type: timestamp }
- key: parking_floor
icon: mdi:layers-outline
source_field: manufacturer_data
length: 14
accuracy_decimals: 0
decode: { offset: 11, length: 1, type: uint8, scale: -1, offset_value: 256 }
- key: parking_location
platform: text_sensor
icon: mdi:map-marker-outline
source_field: manufacturer_data
length: 14
decode: { offset: 12, length: 2, type: string }
# ──────────────────────────────────────────────────────────────
# Path C: OBD (ELM327) over BLE
# ──────────────────────────────────────────────────────────────
- id: car_obd
name: "Vehicle OBD"
source: obd
obd:
service_uuid: "18F0"
tx_char_uuid: "2AF1"
rx_char_uuid: "2AF0"
tx_delay: 50ms
init_commands:
- "ATSP6"
sensors:
#- { key: rpm, preset: rpm, update_interval: 1s }
#- { key: speed, preset: speed, update_interval: 1s }
#- { key: engine_load, preset: engine_load, update_interval: 1s }
#- { key: throttle, preset: throttle, update_interval: 1s }
#- { key: coolant_temp, preset: coolant_temp, update_interval: 10s }
#- { key: intake_temp, preset: intake_air_temp, update_interval: 10s }
#- { key: ambient_temp, preset: ambient_temp, update_interval: 30s }
- { key: battery, preset: battery_voltage, update_interval: 10s }
- { key: run_time, preset: run_time, update_interval: 5s }
- { key: odometer, preset: odometer, update_interval: 30s }
- key: fuel_level
preset: fuel_level
update_interval: 30s
publish:
deadband: 0.5
min_interval: 60s
# GM Extensions (mode 22)
#- { key: gear, preset: gm_current_gear, update_interval: 1s }
#- { key: prnd, preset: gm_prnd_status_alt, update_interval: 1s }
#- { key: torque, preset: actual_torque, update_interval: 1s }
#- { key: oil_pressure, preset: gm_oil_pressure, update_interval: 2s }
#- { key: trans_temp, preset: gm_trans_temp, update_interval: 10s }
# ──────────────────────────────────────────────────────────────
# Path B: GATT Notify & Write (Bi-directional Control)
# ──────────────────────────────────────────────────────────────
#- id: custom_meter
# name: "Custom BLE Meter"
# source: gatt_notify
# gatt:
# service_uuid: "ffe0"
# notify_char_uuid: "ffe1"
# write_char_uuid: "ffe2"
# sensors:
# - key: power
# unit: "W"
# device_class: power
# state_class: measurement
# decode: { offset: 0, length: 2, type: uint16, endian: little }
# controls:
# - key: relay
# type: switch
# command: { on: "A10100", off: "A10000" }