Archived
Validate YAML Configs / Validate YAML Schema (push) Successful in 1m9s
The adapter (IOS-Vlink) advertises service 0x18F0, so use the 18F0/2AF1/2AF0 layout instead of the Vgate E7810A71 guess. Add 26 UDS mode 22 sensors from the Bosch MD1CS003 engine ECU (header 6A8, replies from 688) using OBDb's Citroen signal set: DPF soot level/load, regeneration status and distances, exhaust temperatures around the catalyst, AdBlue range/volume/temperature, oil temperature/pressure and service distance, ECU odometer, fuel rail pressure, gear, water in diesel and battery data. The exhaust temperatures and DPF pressure deviation match Car Scanner readings. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
445 lines
14 KiB
YAML
445 lines
14 KiB
YAML
# HassBle configuration — Toyota Proace City (PSA K9 platform, 2019+)
|
|
# Adapter: Vgate iCar Pro ELM327 V2.3, Bluetooth 4.0 (BLE) variant
|
|
#
|
|
# Served from https://gitea.trzcinski.pro/czcionka/hassble-config (branch main).
|
|
# The app accepts config only from gitea.trzcinski.pro over HTTPS.
|
|
#
|
|
# Do NOT put any Home Assistant credentials (URL/Token) in this file. Enter them in the app.
|
|
|
|
version: 1
|
|
|
|
defaults:
|
|
publish:
|
|
on_change_only: true
|
|
min_interval: 10s
|
|
|
|
devices:
|
|
- id: proace_city_obd
|
|
name: "Toyota Proace City"
|
|
source: obd
|
|
obd:
|
|
# Bind the adapter MAC in the app (Sensors tab) instead of committing it here.
|
|
# The adapter advertises as "IOS-Vlink" with service 0x18F0 (checked with nRF Connect).
|
|
service_uuid: "18F0"
|
|
tx_char_uuid: "2AF1"
|
|
rx_char_uuid: "2AF0"
|
|
tx_delay: 50ms
|
|
init_commands:
|
|
- "ATSP6" # ISO 15765-4 CAN 11-bit 500 kbps, confirmed by Car Scanner
|
|
# PSA sensors below talk to the engine ECU at 6A8 (answers from 688);
|
|
# standard PIDs need the functional header and automatic receive filter back.
|
|
default_commands: ["ATSH7DF", "ATCRA"]
|
|
sensors:
|
|
# Standard SAE J1979 mode 01 PIDs. A PID the ECU does not support answers NO DATA —
|
|
# disable such sensors in the app.
|
|
- { key: rpm, preset: rpm, update_interval: 2s }
|
|
- { key: speed, preset: speed, update_interval: 2s }
|
|
- { key: engine_load, preset: engine_load, update_interval: 5s }
|
|
- { key: coolant_temp, preset: coolant_temp, update_interval: 30s }
|
|
- { key: intake_temp, preset: intake_air_temp, update_interval: 30s }
|
|
- { key: ambient_temp, preset: ambient_temp, update_interval: 60s }
|
|
- { key: battery, preset: battery_voltage, update_interval: 10s }
|
|
- { key: run_time, preset: run_time, update_interval: 10s }
|
|
- key: fuel_level
|
|
preset: fuel_level
|
|
update_interval: 30s
|
|
publish:
|
|
deadband: 0.5
|
|
min_interval: 60s
|
|
# PID A6 is mandatory only on newer (Euro 6d) ECUs.
|
|
- { key: odometer, preset: odometer, update_interval: 60s }
|
|
- key: intake_map
|
|
mode: "01"
|
|
pid: "0B"
|
|
formula: "a"
|
|
unit: "kPa"
|
|
device_class: pressure
|
|
state_class: measurement
|
|
accuracy_decimals: 0
|
|
update_interval: 5s
|
|
- key: barometric_pressure
|
|
mode: "01"
|
|
pid: "33"
|
|
formula: "a"
|
|
unit: "kPa"
|
|
device_class: pressure
|
|
state_class: measurement
|
|
accuracy_decimals: 0
|
|
update_interval: 120s
|
|
# Diesel (1.5 BlueHDi) common-rail pressure; petrol engines answer NO DATA.
|
|
- key: fuel_rail_pressure
|
|
mode: "01"
|
|
pid: "23"
|
|
formula: "(a*256+b)*10"
|
|
unit: "kPa"
|
|
device_class: pressure
|
|
state_class: measurement
|
|
accuracy_decimals: 0
|
|
update_interval: 5s
|
|
- key: distance_since_dtc_clear
|
|
mode: "01"
|
|
pid: "31"
|
|
formula: "a*256+b"
|
|
unit: "km"
|
|
device_class: distance
|
|
state_class: total_increasing
|
|
accuracy_decimals: 0
|
|
update_interval: 300s
|
|
- key: distance_with_mil_on
|
|
mode: "01"
|
|
pid: "21"
|
|
formula: "a*256+b"
|
|
unit: "km"
|
|
device_class: distance
|
|
state_class: measurement
|
|
accuracy_decimals: 0
|
|
icon: mdi:engine-off
|
|
update_interval: 300s
|
|
# ── DPF / exhaust aftertreatment (SAE J1979 diesel PIDs) ──
|
|
# Byte a is the PID's "supported" bitmask, so values start at byte b.
|
|
# Car Scanner lists DPF data only from the PSA profile, so these may answer NO DATA;
|
|
# the PSA section below reads the same values from the engine ECU directly.
|
|
- key: dpf_inlet_temp
|
|
mode: "01"
|
|
pid: "7C"
|
|
formula: "(b*256+c)/10-40"
|
|
unit: "°C"
|
|
device_class: temperature
|
|
state_class: measurement
|
|
accuracy_decimals: 0
|
|
icon: mdi:thermometer-chevron-up
|
|
update_interval: 10s
|
|
- key: dpf_outlet_temp
|
|
mode: "01"
|
|
pid: "7C"
|
|
formula: "(d*256+e)/10-40"
|
|
unit: "°C"
|
|
device_class: temperature
|
|
state_class: measurement
|
|
accuracy_decimals: 0
|
|
icon: mdi:thermometer-chevron-down
|
|
update_interval: 10s
|
|
# Signed 16-bit: rising differential pressure means soot is building up.
|
|
- key: dpf_differential_pressure
|
|
mode: "01"
|
|
pid: "7A"
|
|
formula: "(b*256+c-floor(b/128)*65536)/100"
|
|
unit: "kPa"
|
|
device_class: pressure
|
|
state_class: measurement
|
|
accuracy_decimals: 2
|
|
update_interval: 10s
|
|
# 100 % means the ECU wants a regeneration.
|
|
- key: dpf_regen_trigger
|
|
mode: "01"
|
|
pid: "8B"
|
|
formula: "c*100/255"
|
|
unit: "%"
|
|
state_class: measurement
|
|
accuracy_decimals: 0
|
|
icon: mdi:air-filter
|
|
update_interval: 30s
|
|
- key: dpf_regen_required
|
|
platform: binary_sensor
|
|
mode: "01"
|
|
pid: "8B"
|
|
formula: "floor(c/255)"
|
|
icon: mdi:air-filter
|
|
update_interval: 30s
|
|
- key: dpf_regen_active
|
|
platform: binary_sensor
|
|
mode: "01"
|
|
pid: "8B"
|
|
formula: "b%2"
|
|
icon: mdi:fire
|
|
update_interval: 10s
|
|
- key: dpf_avg_distance_between_regens
|
|
mode: "01"
|
|
pid: "8B"
|
|
formula: "f*256+g"
|
|
unit: "km"
|
|
device_class: distance
|
|
state_class: measurement
|
|
accuracy_decimals: 0
|
|
update_interval: 300s
|
|
- key: egt_bank1_sensor1
|
|
mode: "01"
|
|
pid: "78"
|
|
formula: "(b*256+c)/10-40"
|
|
unit: "°C"
|
|
device_class: temperature
|
|
state_class: measurement
|
|
accuracy_decimals: 0
|
|
update_interval: 10s
|
|
- key: egt_bank1_sensor2
|
|
mode: "01"
|
|
pid: "78"
|
|
formula: "(d*256+e)/10-40"
|
|
unit: "°C"
|
|
device_class: temperature
|
|
state_class: measurement
|
|
accuracy_decimals: 0
|
|
update_interval: 10s
|
|
|
|
# ── PSA engine ECU (Bosch MD1CS003, 1.5 BlueHDi), UDS mode 22 ──
|
|
# DIDs and scaling from OBDb (github.com/OBDb/Citroen, header 6A8 → 688).
|
|
# Names match what Car Scanner's "Citroen 1.5 BlueHDI" profile shows.
|
|
# Byte a is the first byte after the "62 Dxxx" echo.
|
|
- key: psa_dpf_soot_level
|
|
mode: "22"
|
|
pid: "D52F"
|
|
pre_commands: ["ATSH6A8", "ATCRA688"]
|
|
formula: "(b*256+a)/10.24"
|
|
unit: "%"
|
|
state_class: measurement
|
|
accuracy_decimals: 0
|
|
icon: mdi:air-filter
|
|
update_interval: 60s
|
|
- key: psa_dpf_soot_load
|
|
mode: "22"
|
|
pid: "D54B"
|
|
pre_commands: ["ATSH6A8", "ATCRA688"]
|
|
formula: "(a*256+b)/1024"
|
|
unit: "g/L"
|
|
state_class: measurement
|
|
accuracy_decimals: 2
|
|
icon: mdi:air-filter
|
|
update_interval: 60s
|
|
- key: psa_dpf_regen_status
|
|
mode: "22"
|
|
pid: "D521"
|
|
pre_commands: ["ATSH6A8", "ATCRA688"]
|
|
formula: "a"
|
|
accuracy_decimals: 0
|
|
icon: mdi:fire
|
|
update_interval: 15s
|
|
- key: psa_dpf_distance_since_regen
|
|
mode: "22"
|
|
pid: "D519"
|
|
pre_commands: ["ATSH6A8", "ATCRA688"]
|
|
formula: "(b*256+a)/16"
|
|
unit: "km"
|
|
device_class: distance
|
|
state_class: measurement
|
|
accuracy_decimals: 0
|
|
update_interval: 120s
|
|
- key: psa_dpf_avg_regen_interval
|
|
mode: "22"
|
|
pid: "D525"
|
|
pre_commands: ["ATSH6A8", "ATCRA688"]
|
|
formula: "(b*256+a)/16"
|
|
unit: "km"
|
|
device_class: distance
|
|
state_class: measurement
|
|
accuracy_decimals: 0
|
|
update_interval: 600s
|
|
- key: psa_dpf_remaining_life
|
|
mode: "22"
|
|
pid: "D530"
|
|
pre_commands: ["ATSH6A8", "ATCRA688"]
|
|
formula: "(b*256+a-floor(b/128)*65536)*16"
|
|
unit: "km"
|
|
device_class: distance
|
|
state_class: measurement
|
|
accuracy_decimals: 0
|
|
entity_category: diagnostic
|
|
update_interval: 3600s
|
|
# Car Scanner shows this deviation in mbar.
|
|
- key: psa_dpf_diff_pressure_deviation
|
|
mode: "22"
|
|
pid: "D518"
|
|
pre_commands: ["ATSH6A8", "ATCRA688"]
|
|
formula: "a*256+b-floor(a/128)*65536"
|
|
unit: "mbar"
|
|
device_class: pressure
|
|
state_class: measurement
|
|
accuracy_decimals: 0
|
|
update_interval: 15s
|
|
- key: psa_egt_before_catalyst
|
|
mode: "22"
|
|
pid: "D52E"
|
|
pre_commands: ["ATSH6A8", "ATCRA688"]
|
|
formula: "(a*256+b-floor(a/128)*65536)/10-273.14"
|
|
unit: "°C"
|
|
device_class: temperature
|
|
state_class: measurement
|
|
accuracy_decimals: 0
|
|
update_interval: 10s
|
|
- key: psa_egt_after_catalyst
|
|
mode: "22"
|
|
pid: "D555"
|
|
pre_commands: ["ATSH6A8", "ATCRA688"]
|
|
formula: "(a*256+b-floor(a/128)*65536)/10-273.14"
|
|
unit: "°C"
|
|
device_class: temperature
|
|
state_class: measurement
|
|
accuracy_decimals: 0
|
|
update_interval: 10s
|
|
- key: psa_adblue_range
|
|
mode: "22"
|
|
pid: "D513"
|
|
pre_commands: ["ATSH6A8", "ATCRA688"]
|
|
formula: "a*50"
|
|
unit: "km"
|
|
device_class: distance
|
|
state_class: measurement
|
|
accuracy_decimals: 0
|
|
icon: mdi:water
|
|
update_interval: 600s
|
|
- key: psa_adblue_volume
|
|
mode: "22"
|
|
pid: "D558"
|
|
pre_commands: ["ATSH6A8", "ATCRA688"]
|
|
formula: "a/10"
|
|
unit: "L"
|
|
device_class: volume_storage
|
|
state_class: measurement
|
|
accuracy_decimals: 1
|
|
icon: mdi:water
|
|
update_interval: 600s
|
|
- key: psa_adblue_temp
|
|
mode: "22"
|
|
pid: "D56D"
|
|
pre_commands: ["ATSH6A8", "ATCRA688"]
|
|
formula: "a-floor(a/128)*256"
|
|
unit: "°C"
|
|
device_class: temperature
|
|
state_class: measurement
|
|
accuracy_decimals: 0
|
|
entity_category: diagnostic
|
|
update_interval: 600s
|
|
- key: psa_oil_temp
|
|
mode: "22"
|
|
pid: "D47D"
|
|
pre_commands: ["ATSH6A8", "ATCRA688"]
|
|
formula: "(a*256+b-floor(a/128)*65536)/10-273.14"
|
|
unit: "°C"
|
|
device_class: temperature
|
|
state_class: measurement
|
|
accuracy_decimals: 0
|
|
icon: mdi:oil-temperature
|
|
update_interval: 30s
|
|
- key: psa_oil_pressure
|
|
mode: "22"
|
|
pid: "D429"
|
|
pre_commands: ["ATSH6A8", "ATCRA688"]
|
|
formula: "(a*256+b)/1000"
|
|
unit: "bar"
|
|
device_class: pressure
|
|
state_class: measurement
|
|
accuracy_decimals: 2
|
|
update_interval: 15s
|
|
- key: psa_km_since_oil_change
|
|
mode: "22"
|
|
pid: "D43F"
|
|
pre_commands: ["ATSH6A8", "ATCRA688"]
|
|
formula: "a*256+b"
|
|
unit: "km"
|
|
device_class: distance
|
|
state_class: measurement
|
|
accuracy_decimals: 0
|
|
icon: mdi:oil
|
|
update_interval: 3600s
|
|
- key: psa_odometer
|
|
mode: "22"
|
|
pid: "D49C"
|
|
pre_commands: ["ATSH6A8", "ATCRA688"]
|
|
formula: "a*16777216+b*65536+c*256+d"
|
|
unit: "km"
|
|
device_class: distance
|
|
state_class: total_increasing
|
|
accuracy_decimals: 0
|
|
icon: mdi:counter
|
|
update_interval: 300s
|
|
- key: psa_fuel_rail_pressure
|
|
mode: "22"
|
|
pid: "D446"
|
|
pre_commands: ["ATSH6A8", "ATCRA688"]
|
|
formula: "(a*256+b)/10"
|
|
unit: "bar"
|
|
device_class: pressure
|
|
state_class: measurement
|
|
accuracy_decimals: 0
|
|
update_interval: 10s
|
|
- key: psa_fuel_temp
|
|
mode: "22"
|
|
pid: "D42A"
|
|
pre_commands: ["ATSH6A8", "ATCRA688"]
|
|
formula: "(a*256+b)/10-273.14"
|
|
unit: "°C"
|
|
device_class: temperature
|
|
state_class: measurement
|
|
accuracy_decimals: 0
|
|
update_interval: 60s
|
|
- key: psa_boost_air_temp
|
|
mode: "22"
|
|
pid: "D411"
|
|
pre_commands: ["ATSH6A8", "ATCRA688"]
|
|
formula: "(a*256+b-floor(a/128)*65536)/10-273.14"
|
|
unit: "°C"
|
|
device_class: temperature
|
|
state_class: measurement
|
|
accuracy_decimals: 0
|
|
update_interval: 30s
|
|
- key: psa_engaged_gear
|
|
mode: "22"
|
|
pid: "D43D"
|
|
pre_commands: ["ATSH6A8", "ATCRA688"]
|
|
formula: "a"
|
|
accuracy_decimals: 0
|
|
icon: mdi:car-shift-pattern
|
|
update_interval: 5s
|
|
- key: psa_water_in_diesel
|
|
platform: binary_sensor
|
|
mode: "22"
|
|
pid: "D52C"
|
|
pre_commands: ["ATSH6A8", "ATCRA688"]
|
|
formula: "signum(a)"
|
|
icon: mdi:water-alert
|
|
update_interval: 300s
|
|
- key: psa_battery_voltage
|
|
mode: "22"
|
|
pid: "D78A"
|
|
pre_commands: ["ATSH6A8", "ATCRA688"]
|
|
formula: "(a*256+b)/128"
|
|
unit: "V"
|
|
device_class: voltage
|
|
state_class: measurement
|
|
accuracy_decimals: 2
|
|
update_interval: 30s
|
|
- key: psa_battery_current
|
|
mode: "22"
|
|
pid: "D497"
|
|
pre_commands: ["ATSH6A8", "ATCRA688"]
|
|
formula: "(a*16777216+b*65536+c*256+d-floor(a/128)*4294967296)/1024"
|
|
unit: "A"
|
|
device_class: current
|
|
state_class: measurement
|
|
accuracy_decimals: 1
|
|
update_interval: 30s
|
|
# Raw BSI codes; meaning not documented in OBDb.
|
|
- key: psa_battery_charge_state
|
|
mode: "22"
|
|
pid: "D742"
|
|
pre_commands: ["ATSH6A8", "ATCRA688"]
|
|
formula: "a"
|
|
accuracy_decimals: 0
|
|
entity_category: diagnostic
|
|
update_interval: 600s
|
|
- key: psa_battery_wear
|
|
mode: "22"
|
|
pid: "D741"
|
|
pre_commands: ["ATSH6A8", "ATCRA688"]
|
|
formula: "a"
|
|
accuracy_decimals: 0
|
|
entity_category: diagnostic
|
|
update_interval: 3600s
|
|
- key: psa_stop_start_restarts
|
|
mode: "22"
|
|
pid: "D71B"
|
|
pre_commands: ["ATSH6A8", "ATCRA688"]
|
|
formula: "a*16777216+b*65536+c*256+d"
|
|
accuracy_decimals: 0
|
|
entity_category: diagnostic
|
|
update_interval: 3600s
|