Archived
Real readings from the car on 2026-07-30: odometer 197394.5 km odometer at last regen 197055.5 km distance since regen 339.0 km dash 195958 km 197055.5 + 339.0 = 197394.5 to the decimal, which confirms bytes 49, 53 and 57 are all decoded correctly. The ECU counter simply runs 1436.5 km — 0.733% — above the cluster. It exists to time DPF service intervals, is fed by a different speed source than the legal odometer, and drifts from it over a vehicle's life. Apply that as offset_value on the odometer, and on the odometer at last regeneration since it reads the same counter and the cross-check only holds if both move together. Distance since regeneration is a difference, carries no bias, and stays as it is. One reading cannot tell a constant error from a proportional one. A constant is assumed for now and the comment records how to settle it: after 100 km or more, a gap still at 1436.5 confirms the constant, while a gap near 1437.2 means it scales and offset_value should give way to scale 0.000992723. Drop fuel_percent. Standard 01 2F answers NO DATA on this car — OBDb's Accent capture that recorded it as supported is a North American petrol car — and the cluster refuses 22 B002, so there is no route to fuel level here. Drop probe_2103 now that the real sensors report, and give both DPF sensors a state_class so Home Assistant stops warning that a unit is set without one. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
299 lines
12 KiB
YAML
299 lines
12 KiB
YAML
# Device templates for HassBle app → Sensors tab → Import template
|
|
# Loaded from repo root as templates.yaml (same branch as config.yaml)
|
|
|
|
templates:
|
|
- id: jaalee_jht
|
|
name: "Jaalee JHT"
|
|
description: "Temperature / humidity / battery (iBeacon, Apple manufacturer 76)"
|
|
device:
|
|
id: jaalee_jht
|
|
name: "Jaalee JHT"
|
|
source: advertisement
|
|
instance_mode: mac
|
|
match:
|
|
manufacturer_id: 76
|
|
manufacturer_min_length: 24
|
|
manufacturer_hex_prefix: "0215"
|
|
sensors:
|
|
- key: temperature
|
|
device_class: temperature
|
|
unit: "°C"
|
|
state_class: measurement
|
|
accuracy_decimals: 2
|
|
source_field: manufacturer_data
|
|
decode: { offset: 18, length: 2, type: uint16, endian: big, scale: 0.002670288, offset_value: -45 }
|
|
- key: humidity
|
|
device_class: humidity
|
|
unit: "%"
|
|
state_class: measurement
|
|
accuracy_decimals: 2
|
|
source_field: manufacturer_data
|
|
decode: { offset: 20, length: 2, type: uint16, endian: big, scale: 0.001524504 }
|
|
- key: battery
|
|
device_class: battery
|
|
unit: "%"
|
|
state_class: measurement
|
|
source_field: manufacturer_data
|
|
decode: { offset: 23, length: 1, type: uint8 }
|
|
|
|
- id: parking_beacon
|
|
name: "Parking Beacon"
|
|
description: "Shared parking beacon (manufacturer 861 / 0x035D)"
|
|
device:
|
|
id: parking_beacon
|
|
name: "Parking Beacon"
|
|
source: advertisement
|
|
instance_mode: shared
|
|
match:
|
|
manufacturer_id: 861
|
|
sensors:
|
|
- key: parking_time
|
|
device_class: timestamp
|
|
icon: mdi:clock-time-four-outline
|
|
source_field: manufacturer_data
|
|
length: 14
|
|
decode: { offset: 7, length: 4, type: timestamp }
|
|
- key: parking_floor
|
|
icon: mdi:layers-outline
|
|
source_field: manufacturer_data
|
|
length: 14
|
|
accuracy_decimals: 0
|
|
decode: { offset: 11, length: 1, type: uint8, scale: -1, offset_value: 256 }
|
|
- key: parking_location
|
|
platform: text_sensor
|
|
icon: mdi:map-marker-outline
|
|
source_field: manufacturer_data
|
|
length: 14
|
|
decode: { offset: 12, length: 2, type: string }
|
|
|
|
- id: obd_standard
|
|
name: "OBD-II (standard PIDs)"
|
|
description: "RPM, speed, coolant, fuel — bind ELM327 adapter in app"
|
|
device:
|
|
id: obd_vehicle
|
|
name: "OBD Vehicle"
|
|
source: obd
|
|
obd:
|
|
service_uuid: "FFF0"
|
|
tx_char_uuid: "FFF2"
|
|
rx_char_uuid: "FFF1"
|
|
tx_delay: 50ms
|
|
init_commands: []
|
|
sensors:
|
|
- { key: rpm, preset: rpm, update_interval: 1s }
|
|
- { key: speed, preset: speed, update_interval: 1s }
|
|
- { key: coolant_temp, preset: coolant_temp, update_interval: 10s }
|
|
- { key: fuel_level, preset: fuel_level, update_interval: 30s }
|
|
|
|
- id: obd_gm_extended
|
|
name: "OBD-II + GM extensions"
|
|
description: "Standard PIDs plus GM mode-22 sensors (ATSP6 init)"
|
|
device:
|
|
id: car_obd
|
|
name: "Vehicle OBD"
|
|
source: obd
|
|
obd:
|
|
service_uuid: "18F0"
|
|
tx_char_uuid: "2AF1"
|
|
rx_char_uuid: "2AF0"
|
|
tx_delay: 50ms
|
|
init_commands: ["ATSP6"]
|
|
sensors:
|
|
- { key: rpm, preset: rpm, update_interval: 1s }
|
|
- { key: speed, preset: speed, update_interval: 1s }
|
|
- { key: coolant_temp, preset: coolant_temp, update_interval: 10s }
|
|
- key: fuel_level
|
|
preset: fuel_level
|
|
update_interval: 30s
|
|
publish: { deadband: 0.5, min_interval: 60s }
|
|
- { key: gear, preset: gm_current_gear, update_interval: 1s }
|
|
- { key: prnd, preset: gm_prnd_status_alt, update_interval: 1s }
|
|
- { key: oil_pressure, preset: gm_oil_pressure, update_interval: 2s }
|
|
- { key: trans_temp, preset: gm_trans_temp, update_interval: 10s }
|
|
|
|
- id: obd_hyundai_kia
|
|
name: "OBD-II + 현대/기아 계기판"
|
|
description: "RPM, 속도, 총 주행거리, 연료잔량(L), 계기판 전압 — 계기판 7C6 / 22B002"
|
|
device:
|
|
id: car_obd_hk
|
|
name: "Hyundai/Kia OBD"
|
|
source: obd
|
|
obd:
|
|
service_uuid: "18F0"
|
|
tx_char_uuid: "2AF1"
|
|
rx_char_uuid: "2AF0"
|
|
tx_delay: 50ms
|
|
init_commands: ["ATSP6"]
|
|
# default_commands 생략 — 아래 ATSH7C6 센서가 있으므로 앱이 ATSH7DF로 자동 복원
|
|
sensors:
|
|
- { key: rpm, preset: rpm, update_interval: 1s }
|
|
- { key: speed, preset: speed, update_interval: 1s }
|
|
# 계기판(CLU) UDS. 요청 7C6 → 응답 7CE. 한 응답에 주행거리·연료·전압이 함께 온다.
|
|
# 응답: 62 B0 02 [a][b][c][d][e][f][g][h][i][j][k][l]…
|
|
# (a = 62B002 에코 바로 다음 바이트)
|
|
# e → 연료잔량 e*0.5 L
|
|
# f → 계기판 전압 f/12.8 = f*0.078125 V
|
|
# g:h:i → 총 주행거리 24bit km
|
|
# j:k:l → 위와 같은 주행거리의 mile 값 (북미 사양 계기판)
|
|
# 출처: OBDb(obdb.community)에서 현대·기아 11개 차종이 동일한 바이트 배치로 확인.
|
|
# awesomeit Torque 플러그인(35개 차종)·Elantra CN7 PID 목록과도 일치.
|
|
# 2013년식 이후에서 널리 동작하며, 미지원 차는 NO DATA를 반환한다.
|
|
#
|
|
# 예외: 엑센트(RB)는 계기판이 이 DID를 열지 않는다. 2013/2015/2019 실차 캡처에서
|
|
# unsupported로 확인됐고 (2018년식만 예외), 요청하면 7F 22 22를 돌려준다.
|
|
# 엑센트는 아래 obd_hyundai_accent_rb_diesel 템플릿을 쓸 것.
|
|
- key: odometer
|
|
mode: "22"
|
|
pid: "B002"
|
|
pre_commands: ["ATSH7C6"]
|
|
formula: "g*65536+h*256+i"
|
|
unit: "km"
|
|
device_class: distance
|
|
state_class: total_increasing
|
|
accuracy_decimals: 0
|
|
icon: mdi:counter
|
|
update_interval: 60s
|
|
- key: fuel_level
|
|
mode: "22"
|
|
pid: "B002"
|
|
pre_commands: ["ATSH7C6"]
|
|
formula: "e*0.5"
|
|
unit: "L"
|
|
state_class: measurement
|
|
accuracy_decimals: 1
|
|
icon: mdi:gas-station
|
|
update_interval: 30s
|
|
publish: { deadband: 0.5, min_interval: 60s }
|
|
- key: cluster_voltage
|
|
mode: "22"
|
|
pid: "B002"
|
|
pre_commands: ["ATSH7C6"]
|
|
formula: "f*0.078125"
|
|
unit: "V"
|
|
device_class: voltage
|
|
state_class: measurement
|
|
accuracy_decimals: 2
|
|
entity_category: diagnostic
|
|
update_interval: 60s
|
|
|
|
- id: obd_hyundai_accent_rb_diesel
|
|
name: "OBD-II 엑센트(RB) 디젤"
|
|
description: "RPM, 속도, 연료 %, 흡기온도, 대기압 + 총주행거리 프로브 — 엑센트 RB 1.6 TCI-U2"
|
|
device:
|
|
id: car_obd_accent
|
|
name: "Accent RB Diesel"
|
|
source: obd
|
|
obd:
|
|
service_uuid: "18F0"
|
|
tx_char_uuid: "2AF1"
|
|
rx_char_uuid: "2AF0"
|
|
tx_delay: 50ms
|
|
init_commands: ["ATSP6"]
|
|
# 아래 ATSH7E0 센서가 있으므로 표준 센서 앞에 ATSH7DF가 자동 삽입된다
|
|
sensors:
|
|
- { key: rpm, preset: rpm, update_interval: 1s }
|
|
- { key: speed, preset: speed, update_interval: 1s }
|
|
# 연료량은 이 차에서 읽을 방법이 없다. 표준 01 2F는 실차에서 NO DATA를
|
|
# 돌려주고(OBDb 캡처는 북미 가솔린 기준이라 디젤에는 맞지 않았다),
|
|
# 계기판 22B002도 7F 22 22로 거부한다.
|
|
# awesomeit 엑센트RB 2013 D 1.6 TCI-U2 프로필에서 확인된 값들
|
|
- key: intake_temp
|
|
mode: "21"
|
|
pid: "01"
|
|
pre_commands: ["ATSH7E0"]
|
|
formula: "k*0.980392-50"
|
|
unit: "°C"
|
|
device_class: temperature
|
|
state_class: measurement
|
|
accuracy_decimals: 1
|
|
update_interval: 10s
|
|
- key: barometric_pressure
|
|
mode: "21"
|
|
pid: "01"
|
|
pre_commands: ["ATSH7E0"]
|
|
formula: "j*1.372549"
|
|
unit: "kPa"
|
|
device_class: pressure
|
|
state_class: measurement
|
|
accuracy_decimals: 1
|
|
update_interval: 30s
|
|
# ── 총주행거리 (엔진 ECU의 DPF 블록에 같이 실려 온다) ──────────────
|
|
# 엑센트 RB는 계기판(7C6 / 22B002)이 주행거리를 열지 않는다 — 요청하면 7F 22 22.
|
|
# 대신 엔진 ECU의 21 03 블록에 있다 (OBDb 메이커 공용 HYUNDAI_ODO_V2):
|
|
# byte 49~52 마지막 DPF 재생 시점의 주행거리 /1000 km
|
|
# byte 53~56 재생 이후 달린 거리 /1000 km
|
|
# byte 57~60 총주행거리 /1000 km ← 목표
|
|
# 셋은 서로 다른 필드다. awesomeit이 "DPF 주행거리"로 부르는 건 byte 53(재생 후 거리).
|
|
# 그 프로필이 같은 21 03에서 byte 53~55를 읽으므로, 이 차의 응답은 최소
|
|
# byte 55까지 도착한다 — 목표는 두 바이트 뒤다.
|
|
#
|
|
# 응답이 byte 57까지 도착하지 않으면 decode가 null을 돌려주고 아무것도
|
|
# 발행되지 않는다 — 미지원 차에서 엉뚱한 값이 올라오지 않는다.
|
|
#
|
|
# offset_value = -1436.5 는 계기판 대조 보정이다. 2026-07-30 실측에서
|
|
# ECU 카운터 197394.5 km, 계기판 195958 km 로 0.733% 높게 나왔다.
|
|
# 이 카운터는 DPF 서비스 주기용이라 법정 계기판 수치와 별개로 관리되고,
|
|
# 속도 신호원이 달라 장기간에 걸쳐 벌어진다.
|
|
# 측정이 한 번뿐이라 상수 오차인지 비례 오차인지 구분되지 않아 우선 상수로 뒀다.
|
|
# 100km 이상 주행 후 재확인할 것:
|
|
# 차이가 1436.5 그대로면 상수가 맞고, 1437.2 근처로 늘면 비례이므로
|
|
# offset_value 를 빼고 scale 을 0.000992723 으로 바꾼다.
|
|
- key: odometer
|
|
mode: "21"
|
|
pid: "03"
|
|
pre_commands: ["ATSH7E0"]
|
|
decode: { offset: 57, length: 4, type: uint32, endian: big, scale: 0.001, offset_value: -1436.5 }
|
|
unit: "km"
|
|
device_class: distance
|
|
state_class: total_increasing
|
|
accuracy_decimals: 1
|
|
icon: mdi:counter
|
|
update_interval: 60s
|
|
# 검산용: 재생시점 주행거리 + 재생후 거리 = 총주행거리.
|
|
# 재생시점 값도 같은 ECU 카운터라 위와 같은 보정을 걸어야 이 관계가 유지된다.
|
|
# 재생후 거리는 차분이라 편향이 없으므로 보정하지 않는다.
|
|
- key: odometer_at_last_dpf_regen
|
|
mode: "21"
|
|
pid: "03"
|
|
pre_commands: ["ATSH7E0"]
|
|
decode: { offset: 49, length: 4, type: uint32, endian: big, scale: 0.001, offset_value: -1436.5 }
|
|
unit: "km"
|
|
device_class: distance
|
|
state_class: total_increasing
|
|
accuracy_decimals: 1
|
|
entity_category: diagnostic
|
|
update_interval: 60s
|
|
- key: distance_since_dpf_regen
|
|
mode: "21"
|
|
pid: "03"
|
|
pre_commands: ["ATSH7E0"]
|
|
decode: { offset: 53, length: 4, type: uint32, endian: big, scale: 0.001 }
|
|
unit: "km"
|
|
device_class: distance
|
|
state_class: measurement
|
|
accuracy_decimals: 1
|
|
entity_category: diagnostic
|
|
update_interval: 60s
|
|
|
|
- id: gatt_meter_relay
|
|
name: "GATT power meter + relay"
|
|
description: "Notify characteristic + switch control example"
|
|
device:
|
|
id: custom_meter
|
|
name: "Custom BLE Meter"
|
|
source: gatt_notify
|
|
gatt:
|
|
service_uuid: "ffe0"
|
|
notify_char_uuid: "ffe1"
|
|
write_char_uuid: "ffe2"
|
|
sensors:
|
|
- key: power
|
|
unit: "W"
|
|
device_class: power
|
|
state_class: measurement
|
|
decode: { offset: 0, length: 2, type: uint16, endian: little }
|
|
controls:
|
|
- key: relay
|
|
type: switch
|
|
command: { on: "A10100", off: "A10000" }
|