Files
tpms-schrader-eg53ma4-sim/tools/gen_cu8.py
T
czcionka 9b30351779 Symulator 4 czujnikow TPMS Schrader EG53MA4 (ESP32 + CC1101)
Firmware symulujacy 4 czujniki TPMS dla Opla Astry J Sedan 2016 (EU,
protokol Schrader EG53MA4, 433.92 MHz, Manchester G.E.T. MC).
Tryby NORMAL/LEARN/SINGLE, deep sleep, konsola szeregowa.
Weryfikacja: rtl_433 + testy natywne + kompilacja ESP32.

PROJEKT DIAGNOSTYCZNY/TESTOWY - symulator generuje sztuczne dane
cisnienia i nie zastepuje prawdziwych czujnikow TPMS.
2026-10-27 06:09:18 +00:00

96 lines
3.5 KiB
Python
Executable File

#!/usr/bin/env python3
"""Synthesise a .cu8 IQ capture of the TPMS simulator's RF output.
The generated file is what an RTL-SDR would record while the ESP32+CC1101
simulator is transmitting. Feed it to rtl_433 to verify the frame format
without any hardware:
python3 tools/gen_cu8.py --id 2FC871 --pressure 260 --temp 23 -o /tmp/sim.cu8
rtl_433 -r /tmp/sim.cu8
expected:
model : Schrader-EG53MA4 id : 2FC871 pressure_kPa: 260.0 temperature_F: 73
Modulations:
ook ASK/OOK, Manchester data (default; matches the rtl_433 reference
capture and the built-in Schrader-EG53MA4 decoder)
fsk 2-FSK, +/-47.6 kHz deviation, same data (verify with
rtl_433 -X 'n=schrader,m=FSK_MC_ZEROBIT,s=120,l=120,r=300')
DISCLAIMER: diagnostic/test tool only, generates artificial pressure data.
"""
import argparse
import math
import os
import random
import sys
sys.path.insert(0, os.path.dirname(os.path.abspath(__file__)))
from tpms_frame import build_row, build_tx_bits, CHIP_US # noqa: E402
SAMPLE_RATE = 250000
def synth(bits: str, mode: str, deviation_hz: float, amp: float, noise: float,
rng: random.Random):
"""Yield (i, q) int8 pairs for one chip string."""
sps = SAMPLE_RATE * CHIP_US / 1e6 # samples per chip (~30)
total = int(round(len(bits) * sps))
phase = 0.0
for n in range(total):
k = int(n / sps) % len(bits)
bit = bits[k]
if mode == "fsk":
freq = deviation_hz if bit == "1" else -deviation_hz
phase += 2 * math.pi * freq / SAMPLE_RATE
a = amp
else:
a = amp if bit == "1" else 0.0
i = a * math.cos(phase) + rng.gauss(0, noise)
q = a * math.sin(phase) + rng.gauss(0, noise)
yield i, q
def write_cu8(path, samples):
with open(path, "wb") as f:
for i, q in samples:
f.write(bytes((max(0, min(255, int(round(i + 127.5)))),
max(0, min(255, int(round(q + 127.5)))))))
def main() -> int:
p = argparse.ArgumentParser(description=__doc__.splitlines()[0])
p.add_argument("--id", default="2FC871")
p.add_argument("--pressure", type=float, default=260.0)
p.add_argument("--temp", type=float, default=23.0)
p.add_argument("--flags", default="4C900070")
p.add_argument("--mode", choices=("ook", "fsk"), default="ook")
p.add_argument("--deviation", type=float, default=47.6, help="FSK deviation kHz")
p.add_argument("--frames", type=int, default=3)
p.add_argument("--gap-ms", type=float, default=50.0, help="gap between burst frames")
p.add_argument("--amp", type=float, default=60.0)
p.add_argument("--noise", type=float, default=2.0)
p.add_argument("-o", "--out", default="/tmp/opencode/tpms_ref/sim.cu8")
args = p.parse_args()
row = build_row(int(args.id, 16), args.pressure, args.temp, int(args.flags, 16))
bits = build_tx_bits(row)
print(f"frame: {len(bits)} chips, tx bytes:"
f" {' '.join(f'{int(bits[i:i+8],2):02X}' for i in range(0, len(bits), 8))}")
rng = random.Random(1)
gap_sps = int(SAMPLE_RATE * args.gap_ms / 1000)
out = []
for f in range(args.frames):
out.extend(synth(bits, args.mode, args.deviation * 1000, args.amp,
args.noise, rng))
out.extend((0.0, 0.0) for _ in range(gap_sps))
write_cu8(args.out, out)
print(f"wrote {args.out} ({len(out) / SAMPLE_RATE:.3f} s, {args.frames} frames)")
return 0
if __name__ == "__main__":
sys.exit(main())