Archived
Validate YAML Configs / Validate YAML Schema (push) Successful in 1m17s
DPF inlet/outlet temperature (01 7C), differential pressure (01 7A), regeneration trigger, required and active flags plus average distance between regenerations (01 8B), and exhaust gas temperatures (01 78). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
182 lines
6.0 KiB
YAML
182 lines
6.0 KiB
YAML
# HassBle configuration — Toyota Proace City (PSA K9 platform, 2019+)
|
|
# Adapter: Vgate iCar Pro ELM327 V2.3, Bluetooth 4.0 (BLE) variant
|
|
#
|
|
# Served from https://gitea.trzcinski.pro/czcionka/hassble-config (branch main).
|
|
# The app accepts config only from gitea.trzcinski.pro over HTTPS.
|
|
#
|
|
# Do NOT put any Home Assistant credentials (URL/Token) in this file. Enter them in the app.
|
|
|
|
version: 1
|
|
|
|
defaults:
|
|
publish:
|
|
on_change_only: true
|
|
min_interval: 10s
|
|
|
|
devices:
|
|
- id: proace_city_obd
|
|
name: "Toyota Proace City"
|
|
source: obd
|
|
obd:
|
|
# Bind the adapter MAC in the app (Sensors tab) instead of committing it here.
|
|
# Vgate iCar Pro BLE GATT layout. If the app logs "OBD RX/TX characteristic not found",
|
|
# check the adapter with nRF Connect and try one of the common ELM327 BLE layouts:
|
|
# service FFF0, tx FFF2, rx FFF1
|
|
# service 18F0, tx 2AF1, rx 2AF0
|
|
service_uuid: "E7810A71-73AE-499D-8C15-FAA9AEF0C3F2"
|
|
tx_char_uuid: "BEF8D6C9-9C21-4C9E-B632-BD58C1009F9F"
|
|
rx_char_uuid: "BEF8D6C9-9C21-4C9E-B632-BD58C1009F9F"
|
|
tx_delay: 50ms
|
|
init_commands:
|
|
- "ATSP6" # ISO 15765-4 CAN 11-bit 500 kbps; use ATSP0 (auto) if the ECU does not answer
|
|
sensors:
|
|
# Standard SAE J1979 mode 01 PIDs. A PID the ECU does not support answers NO DATA —
|
|
# disable such sensors in the app.
|
|
- { key: rpm, preset: rpm, update_interval: 2s }
|
|
- { key: speed, preset: speed, update_interval: 2s }
|
|
- { key: engine_load, preset: engine_load, update_interval: 5s }
|
|
- { key: coolant_temp, preset: coolant_temp, update_interval: 30s }
|
|
- { key: intake_temp, preset: intake_air_temp, update_interval: 30s }
|
|
- { key: ambient_temp, preset: ambient_temp, update_interval: 60s }
|
|
- { key: battery, preset: battery_voltage, update_interval: 10s }
|
|
- { key: run_time, preset: run_time, update_interval: 10s }
|
|
- key: fuel_level
|
|
preset: fuel_level
|
|
update_interval: 30s
|
|
publish:
|
|
deadband: 0.5
|
|
min_interval: 60s
|
|
# PID A6 is mandatory only on newer (Euro 6d) ECUs.
|
|
- { key: odometer, preset: odometer, update_interval: 60s }
|
|
- key: intake_map
|
|
mode: "01"
|
|
pid: "0B"
|
|
formula: "a"
|
|
unit: "kPa"
|
|
device_class: pressure
|
|
state_class: measurement
|
|
accuracy_decimals: 0
|
|
update_interval: 5s
|
|
- key: barometric_pressure
|
|
mode: "01"
|
|
pid: "33"
|
|
formula: "a"
|
|
unit: "kPa"
|
|
device_class: pressure
|
|
state_class: measurement
|
|
accuracy_decimals: 0
|
|
update_interval: 120s
|
|
# Diesel (1.5 BlueHDi) common-rail pressure; petrol engines answer NO DATA.
|
|
- key: fuel_rail_pressure
|
|
mode: "01"
|
|
pid: "23"
|
|
formula: "(a*256+b)*10"
|
|
unit: "kPa"
|
|
device_class: pressure
|
|
state_class: measurement
|
|
accuracy_decimals: 0
|
|
update_interval: 5s
|
|
- key: distance_since_dtc_clear
|
|
mode: "01"
|
|
pid: "31"
|
|
formula: "a*256+b"
|
|
unit: "km"
|
|
device_class: distance
|
|
state_class: total_increasing
|
|
accuracy_decimals: 0
|
|
update_interval: 300s
|
|
- key: distance_with_mil_on
|
|
mode: "01"
|
|
pid: "21"
|
|
formula: "a*256+b"
|
|
unit: "km"
|
|
device_class: distance
|
|
state_class: measurement
|
|
accuracy_decimals: 0
|
|
icon: mdi:engine-off
|
|
update_interval: 300s
|
|
# ── DPF / exhaust aftertreatment (SAE J1979 diesel PIDs) ──
|
|
# Byte a is the PID's "supported" bitmask, so values start at byte b.
|
|
# If these answer NO DATA, the ECU exposes DPF data only through PSA-specific mode 22 DIDs.
|
|
- key: dpf_inlet_temp
|
|
mode: "01"
|
|
pid: "7C"
|
|
formula: "(b*256+c)/10-40"
|
|
unit: "°C"
|
|
device_class: temperature
|
|
state_class: measurement
|
|
accuracy_decimals: 0
|
|
icon: mdi:thermometer-chevron-up
|
|
update_interval: 10s
|
|
- key: dpf_outlet_temp
|
|
mode: "01"
|
|
pid: "7C"
|
|
formula: "(d*256+e)/10-40"
|
|
unit: "°C"
|
|
device_class: temperature
|
|
state_class: measurement
|
|
accuracy_decimals: 0
|
|
icon: mdi:thermometer-chevron-down
|
|
update_interval: 10s
|
|
# Signed 16-bit: rising differential pressure means soot is building up.
|
|
- key: dpf_differential_pressure
|
|
mode: "01"
|
|
pid: "7A"
|
|
formula: "(b*256+c-floor(b/128)*65536)/100"
|
|
unit: "kPa"
|
|
device_class: pressure
|
|
state_class: measurement
|
|
accuracy_decimals: 2
|
|
update_interval: 10s
|
|
# 100 % means the ECU wants a regeneration.
|
|
- key: dpf_regen_trigger
|
|
mode: "01"
|
|
pid: "8B"
|
|
formula: "c*100/255"
|
|
unit: "%"
|
|
state_class: measurement
|
|
accuracy_decimals: 0
|
|
icon: mdi:air-filter
|
|
update_interval: 30s
|
|
- key: dpf_regen_required
|
|
platform: binary_sensor
|
|
mode: "01"
|
|
pid: "8B"
|
|
formula: "floor(c/255)"
|
|
icon: mdi:air-filter
|
|
update_interval: 30s
|
|
- key: dpf_regen_active
|
|
platform: binary_sensor
|
|
mode: "01"
|
|
pid: "8B"
|
|
formula: "b%2"
|
|
icon: mdi:fire
|
|
update_interval: 10s
|
|
- key: dpf_avg_distance_between_regens
|
|
mode: "01"
|
|
pid: "8B"
|
|
formula: "f*256+g"
|
|
unit: "km"
|
|
device_class: distance
|
|
state_class: measurement
|
|
accuracy_decimals: 0
|
|
update_interval: 300s
|
|
- key: egt_bank1_sensor1
|
|
mode: "01"
|
|
pid: "78"
|
|
formula: "(b*256+c)/10-40"
|
|
unit: "°C"
|
|
device_class: temperature
|
|
state_class: measurement
|
|
accuracy_decimals: 0
|
|
update_interval: 10s
|
|
- key: egt_bank1_sensor2
|
|
mode: "01"
|
|
pid: "78"
|
|
formula: "(d*256+e)/10-40"
|
|
unit: "°C"
|
|
device_class: temperature
|
|
state_class: measurement
|
|
accuracy_decimals: 0
|
|
update_interval: 10s
|