This repository has been archived on 2026-11-06. You can view files and clone it. You cannot open issues or pull requests or push a commit.
Files
hassble-config/templates.yaml
T
eiggerandClaude Opus 5 0eaaf7e92a feat(obd): add odometer probes on ECUs independent of the engine
The working odometer comes from the engine ECU's 21 03 block and sits 1436.5 km
above the dash, corrected with offset_value. Probing more 7E0 blocks cannot
improve on that — they read the same counter and carry the same bias. A value
that matches the dash has to come from a different module.

Add read-only probes on the two independent candidates:

  21 01   @ 7C6  the cluster's mode 21 block. 7C6 refuses 22 B002 but answers
                 with 7F 22 22 rather than staying silent, so the module is
                 present and other identifiers are untested
  22 B001 @ 7C6  identifiers adjacent to B002, unrecorded anywhere
  22 B003 @ 7C6
  21 A0   @ 7E1  the transmission. The awesomeit profile for this exact model
                 reads gear and fluid temperature from this block, so it
                 exists here and may hold its own distance counter
  01 A6          the standard odometer PID. The mode 01 support list for a
                 2013 Accent stops at 0145 so this is a long shot, but it
                 would return the dash value directly and costs one request

Deliberately left out: 22 B002 at 7C6, which this car refuses outright, and
01 2F, which answers NO DATA. Both are recorded in the comment so they do not
get retried.

Note in the template that OBDb's Accent captures come from North American
petrol cars and do not describe this diesel — 7E0.2103 is marked unsupported
there yet works here — so candidates are settled on the car, not from the
capture.

Probes publish only the first byte; the point is the raw response in the log.
Remove the block once the question is answered.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
2026-07-30 14:03:16 +09:00

363 lines
15 KiB
YAML

# Device templates for HassBle app → Sensors tab → Import template
# Loaded from repo root as templates.yaml (same branch as config.yaml)
templates:
- id: jaalee_jht
name: "Jaalee JHT"
description: "Temperature / humidity / battery (iBeacon, Apple manufacturer 76)"
device:
id: jaalee_jht
name: "Jaalee JHT"
source: advertisement
instance_mode: mac
match:
manufacturer_id: 76
manufacturer_min_length: 24
manufacturer_hex_prefix: "0215"
sensors:
- key: temperature
device_class: temperature
unit: "°C"
state_class: measurement
accuracy_decimals: 2
source_field: manufacturer_data
decode: { offset: 18, length: 2, type: uint16, endian: big, scale: 0.002670288, offset_value: -45 }
- key: humidity
device_class: humidity
unit: "%"
state_class: measurement
accuracy_decimals: 2
source_field: manufacturer_data
decode: { offset: 20, length: 2, type: uint16, endian: big, scale: 0.001524504 }
- key: battery
device_class: battery
unit: "%"
state_class: measurement
source_field: manufacturer_data
decode: { offset: 23, length: 1, type: uint8 }
- id: parking_beacon
name: "Parking Beacon"
description: "Shared parking beacon (manufacturer 861 / 0x035D)"
device:
id: parking_beacon
name: "Parking Beacon"
source: advertisement
instance_mode: shared
match:
manufacturer_id: 861
sensors:
- key: parking_time
device_class: timestamp
icon: mdi:clock-time-four-outline
source_field: manufacturer_data
length: 14
decode: { offset: 7, length: 4, type: timestamp }
- key: parking_floor
icon: mdi:layers-outline
source_field: manufacturer_data
length: 14
accuracy_decimals: 0
decode: { offset: 11, length: 1, type: uint8, scale: -1, offset_value: 256 }
- key: parking_location
platform: text_sensor
icon: mdi:map-marker-outline
source_field: manufacturer_data
length: 14
decode: { offset: 12, length: 2, type: string }
- id: obd_standard
name: "OBD-II (standard PIDs)"
description: "RPM, speed, coolant, fuel — bind ELM327 adapter in app"
device:
id: obd_vehicle
name: "OBD Vehicle"
source: obd
obd:
service_uuid: "FFF0"
tx_char_uuid: "FFF2"
rx_char_uuid: "FFF1"
tx_delay: 50ms
init_commands: []
sensors:
- { key: rpm, preset: rpm, update_interval: 1s }
- { key: speed, preset: speed, update_interval: 1s }
- { key: coolant_temp, preset: coolant_temp, update_interval: 10s }
- { key: fuel_level, preset: fuel_level, update_interval: 30s }
- id: obd_gm_extended
name: "OBD-II + GM extensions"
description: "Standard PIDs plus GM mode-22 sensors (ATSP6 init)"
device:
id: car_obd
name: "Vehicle OBD"
source: obd
obd:
service_uuid: "18F0"
tx_char_uuid: "2AF1"
rx_char_uuid: "2AF0"
tx_delay: 50ms
init_commands: ["ATSP6"]
sensors:
- { key: rpm, preset: rpm, update_interval: 1s }
- { key: speed, preset: speed, update_interval: 1s }
- { key: coolant_temp, preset: coolant_temp, update_interval: 10s }
- key: fuel_level
preset: fuel_level
update_interval: 30s
publish: { deadband: 0.5, min_interval: 60s }
- { key: gear, preset: gm_current_gear, update_interval: 1s }
- { key: prnd, preset: gm_prnd_status_alt, update_interval: 1s }
- { key: oil_pressure, preset: gm_oil_pressure, update_interval: 2s }
- { key: trans_temp, preset: gm_trans_temp, update_interval: 10s }
- id: obd_hyundai_kia
name: "OBD-II + 현대/기아 계기판"
description: "RPM, 속도, 총 주행거리, 연료잔량(L), 계기판 전압 — 계기판 7C6 / 22B002"
device:
id: car_obd_hk
name: "Hyundai/Kia OBD"
source: obd
obd:
service_uuid: "18F0"
tx_char_uuid: "2AF1"
rx_char_uuid: "2AF0"
tx_delay: 50ms
init_commands: ["ATSP6"]
# default_commands 생략 — 아래 ATSH7C6 센서가 있으므로 앱이 ATSH7DF로 자동 복원
sensors:
- { key: rpm, preset: rpm, update_interval: 1s }
- { key: speed, preset: speed, update_interval: 1s }
# 계기판(CLU) UDS. 요청 7C6 → 응답 7CE. 한 응답에 주행거리·연료·전압이 함께 온다.
# 응답: 62 B0 02 [a][b][c][d][e][f][g][h][i][j][k][l]…
# (a = 62B002 에코 바로 다음 바이트)
# e → 연료잔량 e*0.5 L
# f → 계기판 전압 f/12.8 = f*0.078125 V
# g:h:i → 총 주행거리 24bit km
# j:k:l → 위와 같은 주행거리의 mile 값 (북미 사양 계기판)
# 출처: OBDb(obdb.community)에서 현대·기아 11개 차종이 동일한 바이트 배치로 확인.
# awesomeit Torque 플러그인(35개 차종)·Elantra CN7 PID 목록과도 일치.
# 2013년식 이후에서 널리 동작하며, 미지원 차는 NO DATA를 반환한다.
#
# 예외: 엑센트(RB)는 계기판이 이 DID를 열지 않는다. 2013/2015/2019 실차 캡처에서
# unsupported로 확인됐고 (2018년식만 예외), 요청하면 7F 22 22를 돌려준다.
# 엑센트는 아래 obd_hyundai_accent_rb_diesel 템플릿을 쓸 것.
- key: odometer
mode: "22"
pid: "B002"
pre_commands: ["ATSH7C6"]
formula: "g*65536+h*256+i"
unit: "km"
device_class: distance
state_class: total_increasing
accuracy_decimals: 0
icon: mdi:counter
update_interval: 60s
- key: fuel_level
mode: "22"
pid: "B002"
pre_commands: ["ATSH7C6"]
formula: "e*0.5"
unit: "L"
state_class: measurement
accuracy_decimals: 1
icon: mdi:gas-station
update_interval: 30s
publish: { deadband: 0.5, min_interval: 60s }
- key: cluster_voltage
mode: "22"
pid: "B002"
pre_commands: ["ATSH7C6"]
formula: "f*0.078125"
unit: "V"
device_class: voltage
state_class: measurement
accuracy_decimals: 2
entity_category: diagnostic
update_interval: 60s
- id: obd_hyundai_accent_rb_diesel
name: "OBD-II 엑센트(RB) 디젤"
description: "RPM, 속도, 연료 %, 흡기온도, 대기압 + 총주행거리 프로브 — 엑센트 RB 1.6 TCI-U2"
device:
id: car_obd_accent
name: "Accent RB Diesel"
source: obd
obd:
service_uuid: "18F0"
tx_char_uuid: "2AF1"
rx_char_uuid: "2AF0"
tx_delay: 50ms
init_commands: ["ATSP6"]
# 아래 ATSH7E0 센서가 있으므로 표준 센서 앞에 ATSH7DF가 자동 삽입된다
sensors:
- { key: rpm, preset: rpm, update_interval: 1s }
- { key: speed, preset: speed, update_interval: 1s }
# 연료량은 이 차에서 읽을 방법이 없다. 표준 01 2F는 실차에서 NO DATA를
# 돌려주고(OBDb 캡처는 북미 가솔린 기준이라 디젤에는 맞지 않았다),
# 계기판 22B002도 7F 22 22로 거부한다.
# awesomeit 엑센트RB 2013 D 1.6 TCI-U2 프로필에서 확인된 값들
- key: intake_temp
mode: "21"
pid: "01"
pre_commands: ["ATSH7E0"]
formula: "k*0.980392-50"
unit: "°C"
device_class: temperature
state_class: measurement
accuracy_decimals: 1
update_interval: 10s
- key: barometric_pressure
mode: "21"
pid: "01"
pre_commands: ["ATSH7E0"]
formula: "j*1.372549"
unit: "kPa"
device_class: pressure
state_class: measurement
accuracy_decimals: 1
update_interval: 30s
# ── 총주행거리 (엔진 ECU의 DPF 블록에 같이 실려 온다) ──────────────
# 엑센트 RB는 계기판(7C6 / 22B002)이 주행거리를 열지 않는다 — 요청하면 7F 22 22.
# 대신 엔진 ECU의 21 03 블록에 있다 (OBDb 메이커 공용 HYUNDAI_ODO_V2):
# byte 49~52 마지막 DPF 재생 시점의 주행거리 /1000 km
# byte 53~56 재생 이후 달린 거리 /1000 km
# byte 57~60 총주행거리 /1000 km ← 목표
# 셋은 서로 다른 필드다. awesomeit이 "DPF 주행거리"로 부르는 건 byte 53(재생 후 거리).
# 그 프로필이 같은 21 03에서 byte 53~55를 읽으므로, 이 차의 응답은 최소
# byte 55까지 도착한다 — 목표는 두 바이트 뒤다.
#
# 응답이 byte 57까지 도착하지 않으면 decode가 null을 돌려주고 아무것도
# 발행되지 않는다 — 미지원 차에서 엉뚱한 값이 올라오지 않는다.
#
# offset_value = -1436.5 는 계기판 대조 보정이다. 2026-07-30 실측에서
# ECU 카운터 197394.5 km, 계기판 195958 km 로 0.733% 높게 나왔다.
# 이 카운터는 DPF 서비스 주기용이라 법정 계기판 수치와 별개로 관리되고,
# 속도 신호원이 달라 장기간에 걸쳐 벌어진다.
# 측정이 한 번뿐이라 상수 오차인지 비례 오차인지 구분되지 않아 우선 상수로 뒀다.
# 100km 이상 주행 후 재확인할 것:
# 차이가 1436.5 그대로면 상수가 맞고, 1437.2 근처로 늘면 비례이므로
# offset_value 를 빼고 scale 을 0.000992723 으로 바꾼다.
- key: odometer
mode: "21"
pid: "03"
pre_commands: ["ATSH7E0"]
decode: { offset: 57, length: 4, type: uint32, endian: big, scale: 0.001, offset_value: -1436.5 }
unit: "km"
device_class: distance
state_class: total_increasing
accuracy_decimals: 1
icon: mdi:counter
update_interval: 60s
# 검산용: 재생시점 주행거리 + 재생후 거리 = 총주행거리.
# 재생시점 값도 같은 ECU 카운터라 위와 같은 보정을 걸어야 이 관계가 유지된다.
# 재생후 거리는 차분이라 편향이 없으므로 보정하지 않는다.
- key: odometer_at_last_dpf_regen
mode: "21"
pid: "03"
pre_commands: ["ATSH7E0"]
decode: { offset: 49, length: 4, type: uint32, endian: big, scale: 0.001, offset_value: -1436.5 }
unit: "km"
device_class: distance
state_class: total_increasing
accuracy_decimals: 1
entity_category: diagnostic
update_interval: 60s
- key: distance_since_dpf_regen
mode: "21"
pid: "03"
pre_commands: ["ATSH7E0"]
decode: { offset: 53, length: 4, type: uint32, endian: big, scale: 0.001 }
unit: "km"
device_class: distance
state_class: measurement
accuracy_decimals: 1
entity_category: diagnostic
update_interval: 60s
# ── 계기판 일치 오도미터 탐색용 프로브 (확인 끝나면 이 블록만 지울 것) ──
#
# 위 odometer 는 엔진 ECU 카운터라 계기판보다 1436.5 km 높고 offset_value 로
# 맞춰둔 상태다. 7E0 의 다른 블록을 더 뒤져도 같은 카운터라 편향이 같으므로,
# 계기판 값을 얻으려면 독립된 ECU(계기판 7C6 / 변속기 7E1)를 봐야 한다.
#
# 배제된 것 — 다시 넣지 말 것:
# 22 B002 @ 7C6 이 차가 7F 22 22 (conditionsNotCorrect)로 직접 거부.
# OBDb 실차 캡처도 2013/2015/2019 엑센트 unsupported.
# 01 2F 연료량. NO DATA. 오도미터와 무관하지만 재시도 방지용 기록.
#
# 주의: OBDb 의 엑센트 캡처는 북미 가솔린 차량이라 이 디젤을 대변하지 못한다.
# 실제로 7E0.2103 이 거기서는 unsupported 인데 이 차에서는 동작한다.
# 그래서 아래 후보들은 캡처로 배제하지 않고 실차에서 직접 확인한다.
#
# 전부 읽기 전용 요청(service 01/21/22)이다. 값은 쓰지 않고 응답 유무와
# raw hex 확보가 목적이므로 formula 는 첫 바이트만 본다.
# 로그에서 확인할 것:
# raw=61xx… / 62xx… → 응답함. hex 전체를 뜨면 오도미터 위치를 찾을 수 있다.
# NO DATA → 미지원
# negative response → 존재하지만 거부 (NRC 확인)
# 계기판 mode 21 블록. 7C6 은 22B002 를 거부하면서도 응답 자체는 하므로
# ECU 는 살아 있다. 계기판 값을 얻을 가능성이 가장 높은 후보다.
- key: probe_7c6_2101
mode: "21"
pid: "01"
pre_commands: ["ATSH7C6"]
formula: "a"
entity_category: diagnostic
update_interval: 60s
# B002 인접 DID. awesomeit·OBDb 어디에도 기록이 없어 순수 탐색이다.
- key: probe_7c6_22b001
mode: "22"
pid: "B001"
pre_commands: ["ATSH7C6"]
formula: "a"
entity_category: diagnostic
update_interval: 60s
- key: probe_7c6_22b003
mode: "22"
pid: "B003"
pre_commands: ["ATSH7C6"]
formula: "a"
entity_category: diagnostic
update_interval: 60s
# 변속기(TCU). awesomeit 엑센트RB 프로필이 21A0 @ 7E1 에서 기어단수·미션오일온도를
# 읽으므로 이 블록은 이 차에 존재한다. 엔진과 독립된 카운터를 가질 수 있다.
- key: probe_7e1_21a0
mode: "21"
pid: "A0"
pre_commands: ["ATSH7E1"]
formula: "a"
entity_category: diagnostic
update_interval: 60s
# 표준 오도미터 PID. 2013 엑센트의 mode 01 지원 목록이 0145 에서 끊겨
# 가능성은 낮지만, 되면 그대로 계기판 값이라 한 번은 확인할 가치가 있다.
- key: probe_01a6
mode: "01"
pid: "A6"
formula: "a"
entity_category: diagnostic
update_interval: 60s
- id: gatt_meter_relay
name: "GATT power meter + relay"
description: "Notify characteristic + switch control example"
device:
id: custom_meter
name: "Custom BLE Meter"
source: gatt_notify
gatt:
service_uuid: "ffe0"
notify_char_uuid: "ffe1"
write_char_uuid: "ffe2"
sensors:
- key: power
unit: "W"
device_class: power
state_class: measurement
decode: { offset: 0, length: 2, type: uint16, endian: little }
controls:
- key: relay
type: switch
command: { on: "A10100", off: "A10000" }