Archived
Validate YAML Configs / Validate YAML Schema (push) Successful in 10s
OBDb marks D52F/D519/D525/D530 as little-endian, which showed 425 % soot and 1632 km since regeneration next to 0.32 g/L soot load. Big-endian gives 1.7 % and 6.4 km, consistent with the soot load. The ECU does not answer 01 2F, so add OBDb's three PSA fuel level sources on the engine ECU (22 0227, 22 040F, 21 A8). Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
487 lines
15 KiB
YAML
487 lines
15 KiB
YAML
# HassBle configuration — Toyota Proace City (PSA K9 platform, 2019+)
|
|
# Adapter: Vgate iCar Pro ELM327 V2.3, Bluetooth 4.0 (BLE) variant
|
|
#
|
|
# Served from https://gitea.trzcinski.pro/czcionka/hassble-config (branch main).
|
|
# The app accepts config only from gitea.trzcinski.pro over HTTPS.
|
|
#
|
|
# Do NOT put any Home Assistant credentials (URL/Token) in this file. Enter them in the app.
|
|
|
|
version: 1
|
|
|
|
defaults:
|
|
publish:
|
|
on_change_only: true
|
|
min_interval: 10s
|
|
|
|
devices:
|
|
- id: proace_city_obd
|
|
name: "Toyota Proace City"
|
|
source: obd
|
|
obd:
|
|
# Bind the adapter MAC in the app (Sensors tab) instead of committing it here.
|
|
# The adapter advertises as "IOS-Vlink" with service 0x18F0 (checked with nRF Connect).
|
|
service_uuid: "18F0"
|
|
tx_char_uuid: "2AF1"
|
|
rx_char_uuid: "2AF0"
|
|
tx_delay: 50ms
|
|
init_commands:
|
|
- "ATSP6" # ISO 15765-4 CAN 11-bit 500 kbps, confirmed by Car Scanner
|
|
# PSA sensors below talk to the engine ECU at 6A8 (answers from 688);
|
|
# standard PIDs need the functional header and automatic receive filter back.
|
|
default_commands: ["ATSH7DF", "ATCRA"]
|
|
sensors:
|
|
# Standard SAE J1979 mode 01 PIDs. A PID the ECU does not support answers NO DATA —
|
|
# disable such sensors in the app.
|
|
- { key: rpm, preset: rpm, update_interval: 2s }
|
|
- { key: speed, preset: speed, update_interval: 2s }
|
|
- { key: engine_load, preset: engine_load, update_interval: 5s }
|
|
- { key: coolant_temp, preset: coolant_temp, update_interval: 30s }
|
|
- { key: intake_temp, preset: intake_air_temp, update_interval: 30s }
|
|
- { key: ambient_temp, preset: ambient_temp, update_interval: 60s }
|
|
- { key: battery, preset: battery_voltage, update_interval: 10s }
|
|
- { key: run_time, preset: run_time, update_interval: 10s }
|
|
# The ECU does not answer 01 2F; see the psa_fuel_level_* candidates below.
|
|
- key: fuel_level
|
|
preset: fuel_level
|
|
update_interval: 30s
|
|
publish:
|
|
deadband: 0.5
|
|
min_interval: 60s
|
|
# PID A6 is mandatory only on newer (Euro 6d) ECUs.
|
|
- { key: odometer, preset: odometer, update_interval: 60s }
|
|
- key: intake_map
|
|
mode: "01"
|
|
pid: "0B"
|
|
formula: "a"
|
|
unit: "kPa"
|
|
device_class: pressure
|
|
state_class: measurement
|
|
accuracy_decimals: 0
|
|
update_interval: 5s
|
|
- key: barometric_pressure
|
|
mode: "01"
|
|
pid: "33"
|
|
formula: "a"
|
|
unit: "kPa"
|
|
device_class: pressure
|
|
state_class: measurement
|
|
accuracy_decimals: 0
|
|
update_interval: 120s
|
|
# Diesel (1.5 BlueHDi) common-rail pressure; petrol engines answer NO DATA.
|
|
- key: fuel_rail_pressure
|
|
mode: "01"
|
|
pid: "23"
|
|
formula: "(a*256+b)*10"
|
|
unit: "kPa"
|
|
device_class: pressure
|
|
state_class: measurement
|
|
accuracy_decimals: 0
|
|
update_interval: 5s
|
|
- key: distance_since_dtc_clear
|
|
mode: "01"
|
|
pid: "31"
|
|
formula: "a*256+b"
|
|
unit: "km"
|
|
device_class: distance
|
|
state_class: total_increasing
|
|
accuracy_decimals: 0
|
|
update_interval: 300s
|
|
- key: distance_with_mil_on
|
|
mode: "01"
|
|
pid: "21"
|
|
formula: "a*256+b"
|
|
unit: "km"
|
|
device_class: distance
|
|
state_class: measurement
|
|
accuracy_decimals: 0
|
|
icon: mdi:engine-off
|
|
update_interval: 300s
|
|
# ── DPF / exhaust aftertreatment (SAE J1979 diesel PIDs) ──
|
|
# Byte a is the PID's "supported" bitmask, so values start at byte b.
|
|
# Car Scanner lists DPF data only from the PSA profile, so these may answer NO DATA;
|
|
# the PSA section below reads the same values from the engine ECU directly.
|
|
- key: dpf_inlet_temp
|
|
mode: "01"
|
|
pid: "7C"
|
|
formula: "(b*256+c)/10-40"
|
|
unit: "°C"
|
|
device_class: temperature
|
|
state_class: measurement
|
|
accuracy_decimals: 0
|
|
icon: mdi:thermometer-chevron-up
|
|
update_interval: 10s
|
|
- key: dpf_outlet_temp
|
|
mode: "01"
|
|
pid: "7C"
|
|
formula: "(d*256+e)/10-40"
|
|
unit: "°C"
|
|
device_class: temperature
|
|
state_class: measurement
|
|
accuracy_decimals: 0
|
|
icon: mdi:thermometer-chevron-down
|
|
update_interval: 10s
|
|
# Signed 16-bit: rising differential pressure means soot is building up.
|
|
- key: dpf_differential_pressure
|
|
mode: "01"
|
|
pid: "7A"
|
|
formula: "(b*256+c-floor(b/128)*65536)/100"
|
|
unit: "kPa"
|
|
device_class: pressure
|
|
state_class: measurement
|
|
accuracy_decimals: 2
|
|
update_interval: 10s
|
|
# 100 % means the ECU wants a regeneration.
|
|
- key: dpf_regen_trigger
|
|
mode: "01"
|
|
pid: "8B"
|
|
formula: "c*100/255"
|
|
unit: "%"
|
|
state_class: measurement
|
|
accuracy_decimals: 0
|
|
icon: mdi:air-filter
|
|
update_interval: 30s
|
|
- key: dpf_regen_required
|
|
platform: binary_sensor
|
|
mode: "01"
|
|
pid: "8B"
|
|
formula: "floor(c/255)"
|
|
icon: mdi:air-filter
|
|
update_interval: 30s
|
|
- key: dpf_regen_active
|
|
platform: binary_sensor
|
|
mode: "01"
|
|
pid: "8B"
|
|
formula: "b%2"
|
|
icon: mdi:fire
|
|
update_interval: 10s
|
|
- key: dpf_avg_distance_between_regens
|
|
mode: "01"
|
|
pid: "8B"
|
|
formula: "f*256+g"
|
|
unit: "km"
|
|
device_class: distance
|
|
state_class: measurement
|
|
accuracy_decimals: 0
|
|
update_interval: 300s
|
|
- key: egt_bank1_sensor1
|
|
mode: "01"
|
|
pid: "78"
|
|
formula: "(b*256+c)/10-40"
|
|
unit: "°C"
|
|
device_class: temperature
|
|
state_class: measurement
|
|
accuracy_decimals: 0
|
|
update_interval: 10s
|
|
- key: egt_bank1_sensor2
|
|
mode: "01"
|
|
pid: "78"
|
|
formula: "(d*256+e)/10-40"
|
|
unit: "°C"
|
|
device_class: temperature
|
|
state_class: measurement
|
|
accuracy_decimals: 0
|
|
update_interval: 10s
|
|
|
|
# ── PSA engine ECU (Bosch MD1CS003, 1.5 BlueHDi), UDS mode 22 ──
|
|
# DIDs and scaling from OBDb (github.com/OBDb/Citroen, header 6A8 → 688).
|
|
# Names match what Car Scanner's "Citroen 1.5 BlueHDI" profile shows.
|
|
# Byte a is the first byte after the "62 Dxxx" echo. OBDb marks some of these DIDs as
|
|
# little-endian (blsb), but on this ECU that gave 425 % soot, so all values are read big-endian.
|
|
- key: psa_dpf_soot_level
|
|
mode: "22"
|
|
pid: "D52F"
|
|
pre_commands: ["ATSH6A8", "ATCRA688"]
|
|
formula: "(a*256+b)/10.24"
|
|
unit: "%"
|
|
state_class: measurement
|
|
accuracy_decimals: 0
|
|
icon: mdi:air-filter
|
|
update_interval: 60s
|
|
- key: psa_dpf_soot_load
|
|
mode: "22"
|
|
pid: "D54B"
|
|
pre_commands: ["ATSH6A8", "ATCRA688"]
|
|
formula: "(a*256+b)/1024"
|
|
unit: "g/L"
|
|
state_class: measurement
|
|
accuracy_decimals: 2
|
|
icon: mdi:air-filter
|
|
update_interval: 60s
|
|
- key: psa_dpf_regen_status
|
|
mode: "22"
|
|
pid: "D521"
|
|
pre_commands: ["ATSH6A8", "ATCRA688"]
|
|
formula: "a"
|
|
accuracy_decimals: 0
|
|
icon: mdi:fire
|
|
update_interval: 15s
|
|
- key: psa_dpf_distance_since_regen
|
|
mode: "22"
|
|
pid: "D519"
|
|
pre_commands: ["ATSH6A8", "ATCRA688"]
|
|
formula: "(a*256+b)/16"
|
|
unit: "km"
|
|
device_class: distance
|
|
state_class: measurement
|
|
accuracy_decimals: 0
|
|
update_interval: 120s
|
|
- key: psa_dpf_avg_regen_interval
|
|
mode: "22"
|
|
pid: "D525"
|
|
pre_commands: ["ATSH6A8", "ATCRA688"]
|
|
formula: "(a*256+b)/16"
|
|
unit: "km"
|
|
device_class: distance
|
|
state_class: measurement
|
|
accuracy_decimals: 0
|
|
update_interval: 600s
|
|
- key: psa_dpf_remaining_life
|
|
mode: "22"
|
|
pid: "D530"
|
|
pre_commands: ["ATSH6A8", "ATCRA688"]
|
|
formula: "(a*256+b-floor(a/128)*65536)*16"
|
|
unit: "km"
|
|
device_class: distance
|
|
state_class: measurement
|
|
accuracy_decimals: 0
|
|
entity_category: diagnostic
|
|
update_interval: 3600s
|
|
# Car Scanner shows this deviation in mbar.
|
|
- key: psa_dpf_diff_pressure_deviation
|
|
mode: "22"
|
|
pid: "D518"
|
|
pre_commands: ["ATSH6A8", "ATCRA688"]
|
|
formula: "a*256+b-floor(a/128)*65536"
|
|
unit: "mbar"
|
|
device_class: pressure
|
|
state_class: measurement
|
|
accuracy_decimals: 0
|
|
update_interval: 15s
|
|
- key: psa_egt_before_catalyst
|
|
mode: "22"
|
|
pid: "D52E"
|
|
pre_commands: ["ATSH6A8", "ATCRA688"]
|
|
formula: "(a*256+b-floor(a/128)*65536)/10-273.14"
|
|
unit: "°C"
|
|
device_class: temperature
|
|
state_class: measurement
|
|
accuracy_decimals: 0
|
|
update_interval: 10s
|
|
- key: psa_egt_after_catalyst
|
|
mode: "22"
|
|
pid: "D555"
|
|
pre_commands: ["ATSH6A8", "ATCRA688"]
|
|
formula: "(a*256+b-floor(a/128)*65536)/10-273.14"
|
|
unit: "°C"
|
|
device_class: temperature
|
|
state_class: measurement
|
|
accuracy_decimals: 0
|
|
update_interval: 10s
|
|
- key: psa_adblue_range
|
|
mode: "22"
|
|
pid: "D513"
|
|
pre_commands: ["ATSH6A8", "ATCRA688"]
|
|
formula: "a*50"
|
|
unit: "km"
|
|
device_class: distance
|
|
state_class: measurement
|
|
accuracy_decimals: 0
|
|
icon: mdi:water
|
|
update_interval: 600s
|
|
- key: psa_adblue_volume
|
|
mode: "22"
|
|
pid: "D558"
|
|
pre_commands: ["ATSH6A8", "ATCRA688"]
|
|
formula: "a/10"
|
|
unit: "L"
|
|
device_class: volume_storage
|
|
state_class: measurement
|
|
accuracy_decimals: 1
|
|
icon: mdi:water
|
|
update_interval: 600s
|
|
- key: psa_adblue_temp
|
|
mode: "22"
|
|
pid: "D56D"
|
|
pre_commands: ["ATSH6A8", "ATCRA688"]
|
|
formula: "a-floor(a/128)*256"
|
|
unit: "°C"
|
|
device_class: temperature
|
|
state_class: measurement
|
|
accuracy_decimals: 0
|
|
entity_category: diagnostic
|
|
update_interval: 600s
|
|
- key: psa_oil_temp
|
|
mode: "22"
|
|
pid: "D47D"
|
|
pre_commands: ["ATSH6A8", "ATCRA688"]
|
|
formula: "(a*256+b-floor(a/128)*65536)/10-273.14"
|
|
unit: "°C"
|
|
device_class: temperature
|
|
state_class: measurement
|
|
accuracy_decimals: 0
|
|
icon: mdi:oil-temperature
|
|
update_interval: 30s
|
|
- key: psa_oil_pressure
|
|
mode: "22"
|
|
pid: "D429"
|
|
pre_commands: ["ATSH6A8", "ATCRA688"]
|
|
formula: "(a*256+b)/1000"
|
|
unit: "bar"
|
|
device_class: pressure
|
|
state_class: measurement
|
|
accuracy_decimals: 2
|
|
update_interval: 15s
|
|
- key: psa_km_since_oil_change
|
|
mode: "22"
|
|
pid: "D43F"
|
|
pre_commands: ["ATSH6A8", "ATCRA688"]
|
|
formula: "a*256+b"
|
|
unit: "km"
|
|
device_class: distance
|
|
state_class: measurement
|
|
accuracy_decimals: 0
|
|
icon: mdi:oil
|
|
update_interval: 3600s
|
|
- key: psa_odometer
|
|
mode: "22"
|
|
pid: "D49C"
|
|
pre_commands: ["ATSH6A8", "ATCRA688"]
|
|
formula: "a*16777216+b*65536+c*256+d"
|
|
unit: "km"
|
|
device_class: distance
|
|
state_class: total_increasing
|
|
accuracy_decimals: 0
|
|
icon: mdi:counter
|
|
update_interval: 300s
|
|
- key: psa_fuel_rail_pressure
|
|
mode: "22"
|
|
pid: "D446"
|
|
pre_commands: ["ATSH6A8", "ATCRA688"]
|
|
formula: "(a*256+b)/10"
|
|
unit: "bar"
|
|
device_class: pressure
|
|
state_class: measurement
|
|
accuracy_decimals: 0
|
|
update_interval: 10s
|
|
- key: psa_fuel_temp
|
|
mode: "22"
|
|
pid: "D42A"
|
|
pre_commands: ["ATSH6A8", "ATCRA688"]
|
|
formula: "(a*256+b)/10-273.14"
|
|
unit: "°C"
|
|
device_class: temperature
|
|
state_class: measurement
|
|
accuracy_decimals: 0
|
|
update_interval: 60s
|
|
- key: psa_boost_air_temp
|
|
mode: "22"
|
|
pid: "D411"
|
|
pre_commands: ["ATSH6A8", "ATCRA688"]
|
|
formula: "(a*256+b-floor(a/128)*65536)/10-273.14"
|
|
unit: "°C"
|
|
device_class: temperature
|
|
state_class: measurement
|
|
accuracy_decimals: 0
|
|
update_interval: 30s
|
|
- key: psa_engaged_gear
|
|
mode: "22"
|
|
pid: "D43D"
|
|
pre_commands: ["ATSH6A8", "ATCRA688"]
|
|
formula: "a"
|
|
accuracy_decimals: 0
|
|
icon: mdi:car-shift-pattern
|
|
update_interval: 5s
|
|
- key: psa_water_in_diesel
|
|
platform: binary_sensor
|
|
mode: "22"
|
|
pid: "D52C"
|
|
pre_commands: ["ATSH6A8", "ATCRA688"]
|
|
formula: "signum(a)"
|
|
icon: mdi:water-alert
|
|
update_interval: 300s
|
|
- key: psa_battery_voltage
|
|
mode: "22"
|
|
pid: "D78A"
|
|
pre_commands: ["ATSH6A8", "ATCRA688"]
|
|
formula: "(a*256+b)/128"
|
|
unit: "V"
|
|
device_class: voltage
|
|
state_class: measurement
|
|
accuracy_decimals: 2
|
|
update_interval: 30s
|
|
- key: psa_battery_current
|
|
mode: "22"
|
|
pid: "D497"
|
|
pre_commands: ["ATSH6A8", "ATCRA688"]
|
|
formula: "(a*16777216+b*65536+c*256+d-floor(a/128)*4294967296)/1024"
|
|
unit: "A"
|
|
device_class: current
|
|
state_class: measurement
|
|
accuracy_decimals: 1
|
|
update_interval: 30s
|
|
# Raw BSI codes; meaning not documented in OBDb.
|
|
- key: psa_battery_charge_state
|
|
mode: "22"
|
|
pid: "D742"
|
|
pre_commands: ["ATSH6A8", "ATCRA688"]
|
|
formula: "a"
|
|
accuracy_decimals: 0
|
|
entity_category: diagnostic
|
|
update_interval: 600s
|
|
- key: psa_battery_wear
|
|
mode: "22"
|
|
pid: "D741"
|
|
pre_commands: ["ATSH6A8", "ATCRA688"]
|
|
formula: "a"
|
|
accuracy_decimals: 0
|
|
entity_category: diagnostic
|
|
update_interval: 3600s
|
|
- key: psa_stop_start_restarts
|
|
mode: "22"
|
|
pid: "D71B"
|
|
pre_commands: ["ATSH6A8", "ATCRA688"]
|
|
formula: "a*16777216+b*65536+c*256+d"
|
|
accuracy_decimals: 0
|
|
entity_category: diagnostic
|
|
update_interval: 3600s
|
|
|
|
# ── PSA fuel level candidates (engine ECU 7E0 → 7E8, OBDb) ──
|
|
# OBDb lists three sources; keep whichever answers on this car and disable the rest.
|
|
- key: psa_fuel_level_pct
|
|
mode: "22"
|
|
pid: "0227"
|
|
pre_commands: ["ATSH7E0", "ATCRA"]
|
|
formula: "a*100/255"
|
|
unit: "%"
|
|
state_class: measurement
|
|
accuracy_decimals: 0
|
|
icon: mdi:gas-station
|
|
update_interval: 60s
|
|
publish:
|
|
deadband: 0.5
|
|
min_interval: 60s
|
|
- key: psa_fuel_level_l
|
|
mode: "22"
|
|
pid: "040F"
|
|
pre_commands: ["ATSH7E0", "ATCRA"]
|
|
formula: "(a*256+b-floor(a/128)*65536)*711/1250"
|
|
unit: "L"
|
|
device_class: volume_storage
|
|
state_class: measurement
|
|
accuracy_decimals: 1
|
|
icon: mdi:gas-station
|
|
update_interval: 60s
|
|
publish:
|
|
deadband: 0.3
|
|
min_interval: 60s
|
|
- key: psa_fuel_level_21
|
|
mode: "21"
|
|
pid: "A8"
|
|
pre_commands: ["ATSH7E0", "ATCRA"]
|
|
formula: "(m*256+n)/256"
|
|
unit: "%"
|
|
state_class: measurement
|
|
accuracy_decimals: 0
|
|
icon: mdi:gas-station
|
|
update_interval: 60s
|