# Device templates for HassBle app → Sensors tab → Import template # Loaded from repo root as templates.yaml (same branch as config.yaml) templates: - id: jaalee_jht name: "Jaalee JHT" description: "Temperature / humidity / battery (iBeacon, Apple manufacturer 76)" device: id: jaalee_jht name: "Jaalee JHT" source: advertisement instance_mode: mac match: manufacturer_id: 76 manufacturer_min_length: 24 manufacturer_hex_prefix: "0215" sensors: - key: temperature device_class: temperature unit: "°C" state_class: measurement accuracy_decimals: 2 source_field: manufacturer_data decode: { offset: 18, length: 2, type: uint16, endian: big, scale: 0.002670288, offset_value: -45 } - key: humidity device_class: humidity unit: "%" state_class: measurement accuracy_decimals: 2 source_field: manufacturer_data decode: { offset: 20, length: 2, type: uint16, endian: big, scale: 0.001524504 } - key: battery device_class: battery unit: "%" state_class: measurement source_field: manufacturer_data decode: { offset: 23, length: 1, type: uint8 } - id: parking_beacon name: "Parking Beacon" description: "Shared parking beacon (manufacturer 861 / 0x035D)" device: id: parking_beacon name: "Parking Beacon" source: advertisement instance_mode: shared match: manufacturer_id: 861 sensors: - key: parking_time device_class: timestamp icon: mdi:clock-time-four-outline source_field: manufacturer_data length: 14 decode: { offset: 7, length: 4, type: timestamp } - key: parking_floor icon: mdi:layers-outline source_field: manufacturer_data length: 14 accuracy_decimals: 0 decode: { offset: 11, length: 1, type: uint8, scale: -1, offset_value: 256 } - key: parking_location platform: text_sensor icon: mdi:map-marker-outline source_field: manufacturer_data length: 14 decode: { offset: 12, length: 2, type: string } - id: obd_standard name: "OBD-II (standard PIDs)" description: "RPM, speed, coolant, fuel — bind ELM327 adapter in app" device: id: obd_vehicle name: "OBD Vehicle" source: obd obd: service_uuid: "FFF0" tx_char_uuid: "FFF2" rx_char_uuid: "FFF1" tx_delay: 50ms init_commands: [] sensors: - { key: rpm, preset: rpm, update_interval: 1s } - { key: speed, preset: speed, update_interval: 1s } - { key: coolant_temp, preset: coolant_temp, update_interval: 10s } - { key: fuel_level, preset: fuel_level, update_interval: 30s } - id: obd_gm_extended name: "OBD-II + GM extensions" description: "Standard PIDs plus GM mode-22 sensors (ATSP6 init)" device: id: car_obd name: "Vehicle OBD" source: obd obd: service_uuid: "18F0" tx_char_uuid: "2AF1" rx_char_uuid: "2AF0" tx_delay: 50ms init_commands: ["ATSP6"] sensors: - { key: rpm, preset: rpm, update_interval: 1s } - { key: speed, preset: speed, update_interval: 1s } - { key: coolant_temp, preset: coolant_temp, update_interval: 10s } - key: fuel_level preset: fuel_level update_interval: 30s publish: { deadband: 0.5, min_interval: 60s } - { key: gear, preset: gm_current_gear, update_interval: 1s } - { key: prnd, preset: gm_prnd_status_alt, update_interval: 1s } - { key: oil_pressure, preset: gm_oil_pressure, update_interval: 2s } - { key: trans_temp, preset: gm_trans_temp, update_interval: 10s } - id: obd_hyundai_kia name: "OBD-II + 현대/기아 확장" description: "RPM, 속도, 연료잔량%, 총 주행거리 (ATSH7E0 헤더 고정)" device: id: car_obd_hk name: "Hyundai/Kia OBD" source: obd obd: service_uuid: "18F0" tx_char_uuid: "2AF1" rx_char_uuid: "2AF0" tx_delay: 50ms init_commands: ["ATZ", "ATE0", "ATL0", "ATS0", "ATH0", "ATSP6", "ATSH7E0"] sensors: - key: rpm preset: rpm pre_commands: ["ATSH7E0"] update_interval: 1s - key: speed preset: speed pre_commands: ["ATSH7E0"] update_interval: 1s - key: fuel_level_hk mode: "22" pid: "303E" pre_commands: ["ATSH7E0"] formula: "a-100" unit: "%" state_class: measurement update_interval: 30s publish: { deadband: 0.5, min_interval: 60s } - key: odometer_hk mode: "22" pid: "F22E" pre_commands: ["ATSH7E0"] formula: "(((a*256*256*256)+b*256*256)+c*256)+d" unit: "km" device_class: distance state_class: total_increasing update_interval: 30s - id: gatt_meter_relay name: "GATT power meter + relay" description: "Notify characteristic + switch control example" device: id: custom_meter name: "Custom BLE Meter" source: gatt_notify gatt: service_uuid: "ffe0" notify_char_uuid: "ffe1" write_char_uuid: "ffe2" sensors: - key: power unit: "W" device_class: power state_class: measurement decode: { offset: 0, length: 2, type: uint16, endian: little } controls: - key: relay type: switch command: { on: "A10100", off: "A10000" }