# Device templates for HassBle app → Sensors tab → Import template # Loaded from repo root as templates.yaml (same branch as config.yaml) templates: - id: jaalee_jht name: "Jaalee JHT" description: "Temperature / humidity / battery (iBeacon, Apple manufacturer 76)" device: id: jaalee_jht name: "Jaalee JHT" source: advertisement instance_mode: mac match: manufacturer_id: 76 manufacturer_min_length: 24 manufacturer_hex_prefix: "0215" sensors: - key: temperature device_class: temperature unit: "°C" state_class: measurement accuracy_decimals: 2 source_field: manufacturer_data decode: { offset: 18, length: 2, type: uint16, endian: big, scale: 0.002670288, offset_value: -45 } - key: humidity device_class: humidity unit: "%" state_class: measurement accuracy_decimals: 2 source_field: manufacturer_data decode: { offset: 20, length: 2, type: uint16, endian: big, scale: 0.001524504 } - key: battery device_class: battery unit: "%" state_class: measurement source_field: manufacturer_data decode: { offset: 23, length: 1, type: uint8 } - id: parking_beacon name: "Parking Beacon" description: "Shared parking beacon (manufacturer 861 / 0x035D)" device: id: parking_beacon name: "Parking Beacon" source: advertisement instance_mode: shared match: manufacturer_id: 861 sensors: - key: parking_time device_class: timestamp icon: mdi:clock-time-four-outline source_field: manufacturer_data length: 14 decode: { offset: 7, length: 4, type: timestamp } - key: parking_floor icon: mdi:layers-outline source_field: manufacturer_data length: 14 accuracy_decimals: 0 decode: { offset: 11, length: 1, type: uint8, scale: -1, offset_value: 256 } - key: parking_location platform: text_sensor icon: mdi:map-marker-outline source_field: manufacturer_data length: 14 decode: { offset: 12, length: 2, type: string } - id: obd_standard name: "OBD-II (standard PIDs)" description: "RPM, speed, coolant, fuel — bind ELM327 adapter in app" device: id: obd_vehicle name: "OBD Vehicle" source: obd obd: service_uuid: "FFF0" tx_char_uuid: "FFF2" rx_char_uuid: "FFF1" tx_delay: 50ms init_commands: [] sensors: - { key: rpm, preset: rpm, update_interval: 1s } - { key: speed, preset: speed, update_interval: 1s } - { key: coolant_temp, preset: coolant_temp, update_interval: 10s } - { key: fuel_level, preset: fuel_level, update_interval: 30s } - id: obd_gm_extended name: "OBD-II + GM extensions" description: "Standard PIDs plus GM mode-22 sensors (ATSP6 init)" device: id: car_obd name: "Vehicle OBD" source: obd obd: service_uuid: "18F0" tx_char_uuid: "2AF1" rx_char_uuid: "2AF0" tx_delay: 50ms init_commands: ["ATSP6"] sensors: - { key: rpm, preset: rpm, update_interval: 1s } - { key: speed, preset: speed, update_interval: 1s } - { key: coolant_temp, preset: coolant_temp, update_interval: 10s } - key: fuel_level preset: fuel_level update_interval: 30s publish: { deadband: 0.5, min_interval: 60s } - { key: gear, preset: gm_current_gear, update_interval: 1s } - { key: prnd, preset: gm_prnd_status_alt, update_interval: 1s } - { key: oil_pressure, preset: gm_oil_pressure, update_interval: 2s } - { key: trans_temp, preset: gm_trans_temp, update_interval: 10s } - id: obd_hyundai_kia name: "OBD-II + 현대/기아 계기판" description: "RPM, 속도, 총 주행거리, 연료잔량(L), 계기판 전압 — 계기판 7C6 / 22B002" device: id: car_obd_hk name: "Hyundai/Kia OBD" source: obd obd: service_uuid: "18F0" tx_char_uuid: "2AF1" rx_char_uuid: "2AF0" tx_delay: 50ms init_commands: ["ATSP6"] # default_commands 생략 — 아래 ATSH7C6 센서가 있으므로 앱이 ATSH7DF로 자동 복원 sensors: - { key: rpm, preset: rpm, update_interval: 1s } - { key: speed, preset: speed, update_interval: 1s } # 계기판(CLU) UDS. 요청 7C6 → 응답 7CE. 한 응답에 주행거리·연료·전압이 함께 온다. # 응답: 62 B0 02 [a][b][c][d][e][f][g][h][i][j][k][l]… # (a = 62B002 에코 바로 다음 바이트) # e → 연료잔량 e*0.5 L # f → 계기판 전압 f/12.8 = f*0.078125 V # g:h:i → 총 주행거리 24bit km # j:k:l → 위와 같은 주행거리의 mile 값 (북미 사양 계기판) # 출처: OBDb(obdb.community)에서 현대·기아 11개 차종이 동일한 바이트 배치로 확인. # awesomeit Torque 플러그인(35개 차종)·Elantra CN7 PID 목록과도 일치. # 2013년식 이후에서 널리 동작하며, 미지원 차는 NO DATA를 반환한다. # # 예외: 엑센트(RB)는 계기판이 이 DID를 열지 않는다. 2013/2015/2019 실차 캡처에서 # unsupported로 확인됐고 (2018년식만 예외), 요청하면 7F 22 22를 돌려준다. # 엑센트는 아래 obd_hyundai_accent_rb_diesel 템플릿을 쓸 것. - key: odometer mode: "22" pid: "B002" pre_commands: ["ATSH7C6"] formula: "g*65536+h*256+i" unit: "km" device_class: distance state_class: total_increasing accuracy_decimals: 0 icon: mdi:counter update_interval: 60s - key: fuel_level mode: "22" pid: "B002" pre_commands: ["ATSH7C6"] formula: "e*0.5" unit: "L" state_class: measurement accuracy_decimals: 1 icon: mdi:gas-station update_interval: 30s publish: { deadband: 0.5, min_interval: 60s } - key: cluster_voltage mode: "22" pid: "B002" pre_commands: ["ATSH7C6"] formula: "f*0.078125" unit: "V" device_class: voltage state_class: measurement accuracy_decimals: 2 entity_category: diagnostic update_interval: 60s - id: obd_hyundai_accent_rb_diesel name: "OBD-II 엑센트(RB) 디젤" description: "RPM, 속도, 연료 %, 흡기온도, 대기압 + 총주행거리 프로브 — 엑센트 RB 1.6 TCI-U2" device: id: car_obd_accent name: "Accent RB Diesel" source: obd obd: service_uuid: "18F0" tx_char_uuid: "2AF1" rx_char_uuid: "2AF0" tx_delay: 50ms init_commands: ["ATSP6"] # 아래 ATSH7E0 센서가 있으므로 표준 센서 앞에 ATSH7DF가 자동 삽입된다 sensors: - { key: rpm, preset: rpm, update_interval: 1s } - { key: speed, preset: speed, update_interval: 1s } # 연료량은 이 차에서 읽을 방법이 없다. 표준 01 2F는 실차에서 NO DATA를 # 돌려주고(OBDb 캡처는 북미 가솔린 기준이라 디젤에는 맞지 않았다), # 계기판 22B002도 7F 22 22로 거부한다. # awesomeit 엑센트RB 2013 D 1.6 TCI-U2 프로필에서 확인된 값들 - key: intake_temp mode: "21" pid: "01" pre_commands: ["ATSH7E0"] formula: "k*0.980392-50" unit: "°C" device_class: temperature state_class: measurement accuracy_decimals: 1 update_interval: 10s - key: barometric_pressure mode: "21" pid: "01" pre_commands: ["ATSH7E0"] formula: "j*1.372549" unit: "kPa" device_class: pressure state_class: measurement accuracy_decimals: 1 update_interval: 30s # ── 총주행거리 (엔진 ECU의 DPF 블록에 같이 실려 온다) ────────────── # 엑센트 RB는 계기판(7C6 / 22B002)이 주행거리를 직접 내주지 않는다 — # 요청하면 7F 22 22. 그래서 대안으로 엔진 ECU의 21 03 블록을 쓴다 # (OBDb 메이커 공용 HYUNDAI_ODO_V2): # byte 49~52 마지막 DPF 재생 시점의 주행거리 /1000 km # byte 53~56 재생 이후 달린 거리 /1000 km # byte 57~60 총주행거리 /1000 km ← 목표 # 셋은 서로 다른 필드다. awesomeit이 "DPF 주행거리"로 부르는 건 byte 53(재생 후 거리). # # 응답이 byte 57까지 도착하지 않으면 decode가 null을 돌려주고 아무것도 # 발행되지 않는다 — 미지원 차에서 엉뚱한 값이 올라오지 않는다. # # 보정: 2026-07-30 실측에서 이 ECU 카운터가 계기판(195958 km)보다 # 0.7331% 높게(197394.5 km) 나왔다. 처음엔 상수(offset_value)로 보정했으나 # 신차(카운터=0)에서 dash=-1436.5km 가 나오는 게 되어 성립할 수 없다. # 배율(scale) 보정은 원점을 지나므로(카운터=0 → dash=0) 물리적으로 맞다 — # 이 카운터는 계기판과 별개 환산계수로 바퀴속도 펄스를 거리로 누적하는 # 서비스용 값이라, 오차가 주행거리에 비례해 벌어지는 게 정상이다. # 세 필드가 odometer = at_regen + since_regen 항등식을 만족하려면 # 셋 다 같은 배율을 써야 한다 (상수 보정과 달리 since_regen도 예외 없음). # # 측정이 한 점뿐이라 배율만 가정했고 절편은 0으로 뒀다. 100km 이상 # 주행 후 재확인해 두 점으로 완전한 affine 식(scale·offset_value 둘 다)을 # 풀 것 — 아래 odometer_ext_session 이 계기판 값을 직접 준다면 이 보정 # 자체가 필요 없어지므로 그쪽을 먼저 확인한다. - key: odometer mode: "21" pid: "03" pre_commands: ["ATSH7E0"] decode: { offset: 57, length: 4, type: uint32, endian: big, scale: 0.000992723 } unit: "km" device_class: distance state_class: total_increasing accuracy_decimals: 1 icon: mdi:counter update_interval: 60s # 검산용: 재생시점 주행거리 + 재생후 거리 = 총주행거리. # 셋 다 같은 카운터를 공유하므로 같은 배율을 적용해야 항등식이 유지된다. - key: odometer_at_last_dpf_regen mode: "21" pid: "03" pre_commands: ["ATSH7E0"] decode: { offset: 49, length: 4, type: uint32, endian: big, scale: 0.000992723 } unit: "km" device_class: distance state_class: total_increasing accuracy_decimals: 1 entity_category: diagnostic update_interval: 60s - key: distance_since_dpf_regen mode: "21" pid: "03" pre_commands: ["ATSH7E0"] decode: { offset: 53, length: 4, type: uint32, endian: big, scale: 0.000992723 } unit: "km" device_class: distance state_class: measurement accuracy_decimals: 1 entity_category: diagnostic update_interval: 60s # ── 계기판 오도미터 재시도: 확장 진단 세션 ───────────────────────── # 위 odometer 는 어디까지나 대체 경로(추정 보정)다. 진짜 계기판 값을 # 직접 받을 가능성이 아직 남아 있다 — 7F 22 22 의 NRC 22(conditionsNotCorrect)는 # UDS 표준상 "그 DID는 존재하는데 지금 조건에서 거부"라는 뜻이다. # DID 자체가 없다는 NRC 11(serviceNotSupported)·31(requestOutOfRange)이 아니었다. # 흔한 원인은 확장 진단 세션(10 03) 미진입이다. 요청 순서에 세션 진입을 # 끼워 넣고 재시도한다. 세션 진입 응답(1003) 자체는 로그에 안 남지만 # (pre_commands 응답은 기록되지 않음), 뒤따르는 22B002 응답은 그대로 남는다. # raw=62B002… → 성공. formula 는 OBDb 배치(g:h:i = byte 6~8, 24bit) 그대로 # 써서 계기판 값이 보정 없이 직접 나온다 # negative response → 여전히 거부. NRC 가 바뀌었는지 확인 (22 그대로면 # 엔진 구동중이라 막힌 것일 수 있음 — 시동 끄고 재시도) - key: odometer_ext_session mode: "22" pid: "B002" pre_commands: ["ATSH7C6", "1003"] formula: "g*65536+h*256+i" unit: "km" device_class: distance state_class: total_increasing accuracy_decimals: 0 entity_category: diagnostic update_interval: 60s # 계기판(22B002)·표준(01A6)·변속기(21A0) 오프셋 0~15 스캔은 195958km와 # 일치하는 값을 찾지 못해 제거했다. 계기판은 애초에 22B002 자체를 # 7F 22 22로 거부하므로 다른 DID를 더 뒤져볼 이유가 약하고, 표준 01A6은 # mode 01 지원 목록에 없어 예상대로였다. 위 offset_value 보정을 계속 쓴다. # ── 변속기(TCU) 21A0 @ 7E1 ──────────────────────────────────────── # awesomeit 엑센트RB 2013 D 1.6 TCI-U2 프로필의 공식 그대로다. # 오도미터 스캔과는 별개로, 이 블록 자체는 이 차에 존재하는 것으로 알려진 # 값이라 남겨둔다. 스캔은 offset 0~15만 봤고 이 값들은 13·20·21번째라 # 범위 안이었지만 195958과 다른 값(온도·기어)이라 스캔에서 걸러졌을 뿐, # 응답 자체가 없었는지는 확인되지 않았다. 재임포트 후 값이 안 뜨면 # (NO DATA가 로그에 남으면) 이 3개도 지운다. # N(byte 13) 미션오일온도, U(byte 20) 기어위치, V(byte 21) 기어단수 - key: trans_oil_temp mode: "21" pid: "A0" pre_commands: ["ATSH7E1"] formula: "n-40" unit: "°C" device_class: temperature state_class: measurement accuracy_decimals: 1 icon: mdi:oil-temperature update_interval: 10s - key: gear_position mode: "21" pid: "A0" pre_commands: ["ATSH7E1"] platform: text_sensor icon: mdi:car-shift-pattern decode: offset: 20 length: 1 type: uint8 map: "8": "D" "9": "N" "10": "R" "11": "P" "12": "Sport" "16": "E Mode" update_interval: 1s - key: gear mode: "21" pid: "A0" pre_commands: ["ATSH7E1"] platform: text_sensor icon: mdi:numeric decode: offset: 21 length: 1 type: uint8 map: "0": "P/N" "1": "1" "2": "2" "3": "3" "4": "4" "5": "5" "6": "6" "7": "7" "8": "8" update_interval: 1s - id: gatt_meter_relay name: "GATT power meter + relay" description: "Notify characteristic + switch control example" device: id: custom_meter name: "Custom BLE Meter" source: gatt_notify gatt: service_uuid: "ffe0" notify_char_uuid: "ffe1" write_char_uuid: "ffe2" sensors: - key: power unit: "W" device_class: power state_class: measurement decode: { offset: 0, length: 2, type: uint16, endian: little } controls: - key: relay type: switch command: { on: "A10100", off: "A10000" }