# HassBle configuration — Toyota Proace City (PSA K9 platform, 2019+) # Adapter: Vgate iCar Pro ELM327 V2.3, Bluetooth 4.0 (BLE) variant # # Served from https://gitea.trzcinski.pro/czcionka/hassble-config (branch main). # The app accepts config only from gitea.trzcinski.pro over HTTPS. # # Do NOT put any Home Assistant credentials (URL/Token) in this file. Enter them in the app. version: 1 defaults: publish: on_change_only: true min_interval: 10s devices: - id: proace_city_obd name: "Toyota Proace City" source: obd obd: # Bind the adapter MAC in the app (Sensors tab) instead of committing it here. # Vgate iCar Pro BLE GATT layout. If the app logs "OBD RX/TX characteristic not found", # check the adapter with nRF Connect and try one of the common ELM327 BLE layouts: # service FFF0, tx FFF2, rx FFF1 # service 18F0, tx 2AF1, rx 2AF0 service_uuid: "E7810A71-73AE-499D-8C15-FAA9AEF0C3F2" tx_char_uuid: "BEF8D6C9-9C21-4C9E-B632-BD58C1009F9F" rx_char_uuid: "BEF8D6C9-9C21-4C9E-B632-BD58C1009F9F" tx_delay: 50ms init_commands: - "ATSP6" # ISO 15765-4 CAN 11-bit 500 kbps; use ATSP0 (auto) if the ECU does not answer sensors: # Standard SAE J1979 mode 01 PIDs. A PID the ECU does not support answers NO DATA — # disable such sensors in the app. - { key: rpm, preset: rpm, update_interval: 2s } - { key: speed, preset: speed, update_interval: 2s } - { key: engine_load, preset: engine_load, update_interval: 5s } - { key: coolant_temp, preset: coolant_temp, update_interval: 30s } - { key: intake_temp, preset: intake_air_temp, update_interval: 30s } - { key: ambient_temp, preset: ambient_temp, update_interval: 60s } - { key: battery, preset: battery_voltage, update_interval: 10s } - { key: run_time, preset: run_time, update_interval: 10s } - key: fuel_level preset: fuel_level update_interval: 30s publish: deadband: 0.5 min_interval: 60s # PID A6 is mandatory only on newer (Euro 6d) ECUs. - { key: odometer, preset: odometer, update_interval: 60s } - key: intake_map mode: "01" pid: "0B" formula: "a" unit: "kPa" device_class: pressure state_class: measurement accuracy_decimals: 0 update_interval: 5s - key: barometric_pressure mode: "01" pid: "33" formula: "a" unit: "kPa" device_class: pressure state_class: measurement accuracy_decimals: 0 update_interval: 120s # Diesel (1.5 BlueHDi) common-rail pressure; petrol engines answer NO DATA. - key: fuel_rail_pressure mode: "01" pid: "23" formula: "(a*256+b)*10" unit: "kPa" device_class: pressure state_class: measurement accuracy_decimals: 0 update_interval: 5s - key: distance_since_dtc_clear mode: "01" pid: "31" formula: "a*256+b" unit: "km" device_class: distance state_class: total_increasing accuracy_decimals: 0 update_interval: 300s - key: distance_with_mil_on mode: "01" pid: "21" formula: "a*256+b" unit: "km" device_class: distance state_class: measurement accuracy_decimals: 0 icon: mdi:engine-off update_interval: 300s