# HassBle Configuration File # # Host this config.yaml file in a Git repository (e.g., GitHub) and enter the RAW URL in the HassBle Android app. # The app will download this configuration, decode BLE advertisements/sensors, and declare/update them in Home Assistant. # # Do NOT put any Home Assistant credentials (URL/Token) in this file. Enter them directly in the app. version: 1 defaults: publish: on_change_only: true min_interval: 10s devices: # ────────────────────────────────────────────────────────────── # Path A: BLE Passive Scanning (Advertisements) # ────────────────────────────────────────────────────────────── # Jaalee JHT — instance_mode: mac → 스캔된 MAC마다 jaalee_jht_{MAC} 엔티티 자동 생성 # Ref: https://github.com/eigger/espcomponents/tree/master/components/jaalee_jht # Temp/Humidity formula: https://sensor.jaalee.com/scan_api.html #- id: jaalee_jht # name: "Jaalee JHT" # source: advertisement # instance_mode: mac # match: # manufacturer_id: 76 # Apple Inc. (0x004C) — decimal 사용 필수 (hex 0x... 파싱 불안정) # manufacturer_min_length: 24 # manufacturer_hex_prefix: "0215" # iBeacon 타입 마커 (0x02=subtype, 0x15=length 21) # sensors: # - key: temperature # device_class: temperature # unit: "°C" # state_class: measurement # accuracy_decimals: 2 # source_field: manufacturer_data # decode: { offset: 18, length: 2, type: uint16, endian: big, scale: 0.002670288, offset_value: -45 } # - key: humidity # device_class: humidity # unit: "%" # state_class: measurement # accuracy_decimals: 2 # source_field: manufacturer_data # decode: { offset: 20, length: 2, type: uint16, endian: big, scale: 0.001524504 } # - key: battery # device_class: battery # unit: "%" # state_class: measurement # source_field: manufacturer_data # decode: { offset: 23, length: 1, type: uint8 } # Parking beacon — instance_mode: shared → MAC 무관, manufacturer 0x035D 광고가 하나의 엔티티 공유 # payload 14바이트: [7..10]=월·일·시·분, [11]=배터리(역산), [12..13]=코드 - id: parking_beacon name: "Parking Beacon" source: advertisement instance_mode: shared match: manufacturer_id: 861 # 0x035D sensors: - key: parking_time device_class: timestamp source_field: manufacturer_data min_length: 14 decode: { offset: 7, length: 4, type: timestamp } - key: parking_floor source_field: manufacturer_data min_length: 14 accuracy_decimals: 0 state_class: none decode: { offset: 11, length: 1, type: uint8, scale: -1, offset_value: 256 } - key: parking_location platform: text_sensor source_field: manufacturer_data min_length: 14 state_class: none decode: { offset: 12, length: 2, type: string } # ────────────────────────────────────────────────────────────── # Path C: OBD (ELM327) over BLE # ────────────────────────────────────────────────────────────── - id: car_obd name: "Vehicle OBD" source: obd obd: service_uuid: "18F0" tx_char_uuid: "2AF1" rx_char_uuid: "2AF0" tx_delay: 50ms init_commands: - "ATZ" - "ATE0" - "ATL0" - "ATS0" - "ATH0" - "ATSP6" sensors: #- { key: rpm, preset: rpm, update_interval: 1s } #- { key: speed, preset: speed, update_interval: 1s } #- { key: engine_load, preset: engine_load, update_interval: 1s } #- { key: throttle, preset: throttle, update_interval: 1s } #- { key: coolant_temp, preset: coolant_temp, update_interval: 10s } #- { key: intake_temp, preset: intake_air_temp, update_interval: 10s } #- { key: ambient_temp, preset: ambient_temp, update_interval: 30s } - { key: battery, preset: battery_voltage, update_interval: 10s } - { key: run_time, preset: run_time, update_interval: 5s } - { key: odometer, preset: odometer, update_interval: 30s } - key: fuel_level preset: fuel_level update_interval: 30s publish: deadband: 0.5 min_interval: 60s # GM Extensions (mode 22) #- { key: gear, preset: gm_current_gear, update_interval: 1s } #- { key: prnd, preset: gm_prnd_status_alt, update_interval: 1s } #- { key: torque, preset: actual_torque, update_interval: 1s } #- { key: oil_pressure, preset: gm_oil_pressure, update_interval: 2s } #- { key: trans_temp, preset: gm_trans_temp, update_interval: 10s } # ────────────────────────────────────────────────────────────── # Path B: GATT Notify & Write (Bi-directional Control) # ────────────────────────────────────────────────────────────── #- id: custom_meter # name: "Custom BLE Meter" # source: gatt_notify # gatt: # service_uuid: "ffe0" # notify_char_uuid: "ffe1" # write_char_uuid: "ffe2" # sensors: # - key: power # unit: "W" # device_class: power # state_class: measurement # decode: { offset: 0, length: 2, type: uint16, endian: little } # controls: # - key: relay # type: switch # command: { on: "A10100", off: "A10000" }