Archived
fix(obd): retry cluster odometer with flow control instead of a session
meatpiHQ/wican-fw#478 has two real Hyundai/Kia vehicles reading the odometer from the same header (7C6) and PID (22 B002) our car refuses: Ioniq 28kWh (WiCAN): pid_init "ATSH7C6;ATFCSH7C6" — works Ioniq 5 (canair): 22B002 queried directly — works Neither needed a diagnostic session (10 03). That weakens the earlier theory that our 7F 22 22 (NRC 0x22, conditionsNotCorrect) just needs a session to clear — the working examples got a positive response without one, using only flow control setup. Replace odometer_ext_session's session attempt with odometer_flow_control, matching what those cases actually needed (ATFCSH/ATFCSD/ATFCSM1), which our earlier attempt never set explicitly. The linked #514 in that same issue is instructive for a different reason: it is a WiCAN bug where ISO-TP PCI bytes leak into the payload it hands to user expressions, shifting every byte offset. That is the same defect class as the multi-frame length-header bug we fixed in this app, but it is not our bug — our own odometer cross-check (odometer_at_last_dpf_regen + distance_since_dpf_regen == odometer, using OBDb's PCI-stripped byte positions) already proved this app reassembles ISO-TP correctly, so there is nothing to fix here. That issue also shows the odometer's position inside a 22 B002 response is not fixed across Hyundai/Kia generations: byte 6-8 (g:h:i) for the Ioniq 5 and OBDb's eleven ICE models, but byte 9-11 (j:k:l) for the older 28kWh Ioniq (recovered from WiCAN's buggy offset via the conversion table posted in #514). Noted in a comment: if odometer_flow_control answers but the value looks wrong, try j*65536+k*256+l before giving up on it. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
This commit is contained in:
1 parent
a1a00b7636
commit
e2c20ac79f
1 file changed
+23
-10
+23
-10
@@ -240,7 +240,7 @@ templates:
|
||||
#
|
||||
# 측정이 한 점뿐이라 배율만 가정했고 절편은 0으로 뒀다. 100km 이상
|
||||
# 주행 후 재확인해 두 점으로 완전한 affine 식(scale·offset_value 둘 다)을
|
||||
# 풀 것 — 아래 odometer_ext_session 이 계기판 값을 직접 준다면 이 보정
|
||||
# 풀 것 — 아래 odometer_flow_control 이 계기판 값을 직접 준다면 이 보정
|
||||
# 자체가 필요 없어지므로 그쪽을 먼저 확인한다.
|
||||
- key: odometer
|
||||
mode: "21"
|
||||
@@ -283,17 +283,30 @@ templates:
|
||||
# 직접 받을 가능성이 아직 남아 있다 — 7F 22 22 의 NRC 22(conditionsNotCorrect)는
|
||||
# UDS 표준상 "그 DID는 존재하는데 지금 조건에서 거부"라는 뜻이다.
|
||||
# DID 자체가 없다는 NRC 11(serviceNotSupported)·31(requestOutOfRange)이 아니었다.
|
||||
# 흔한 원인은 확장 진단 세션(10 03) 미진입이다. 요청 순서에 세션 진입을
|
||||
# 끼워 넣고 재시도한다. 세션 진입 응답(1003) 자체는 로그에 안 남지만
|
||||
# (pre_commands 응답은 기록되지 않음), 뒤따르는 22B002 응답은 그대로 남는다.
|
||||
# raw=62B002… → 성공. formula 는 OBDb 배치(g:h:i = byte 6~8, 24bit) 그대로
|
||||
# 써서 계기판 값이 보정 없이 직접 나온다
|
||||
# negative response → 여전히 거부. NRC 가 바뀌었는지 확인 (22 그대로면
|
||||
# 엔진 구동중이라 막힌 것일 수 있음 — 시동 끄고 재시도)
|
||||
- key: odometer_ext_session
|
||||
#
|
||||
# meatpiHQ/wican-fw#478 에서 같은 헤더(7C6)·같은 PID(22B002)로 실제 성공한
|
||||
# 사례 둘을 확인했다: 아이오닉 28kWh(WiCAN, pid_init "ATSH7C6;ATFCSH7C6")와
|
||||
# 아이오닉5(canair, 세션 명령 없이 바로 조회). 둘 다 확장 세션(10 03) 없이
|
||||
# 됐고, 공통점은 흐름제어(ATFCSH) 설정뿐이었다. 그래서 세션 대신 흐름제어를
|
||||
# 먼저 시도한다 — 실제 성공 사례에 더 가깝다.
|
||||
#
|
||||
# 오도미터 위치도 세대별로 다르다: 아이오닉5·OBDb ICE 11개 차종은 byte
|
||||
# 6~8(g,h,i)인데, 구형 아이오닉 28kWh는 byte 9~11(j,k,l)이었다
|
||||
# (WiCAN이 ISO-TP PCI 바이트를 페이로드에 섞어 넣는 별도 버그가 있어,
|
||||
# 그 이슈에서 공개한 보정표로 실제 위치를 역산한 값). 응답은 왔는데
|
||||
# 195958과 안 맞으면 formula 를 "j*65536+k*256+l" 로 바꿔서 재시도할 것.
|
||||
#
|
||||
# pre_commands 자체의 응답(흐름제어 설정 OK/에러)은 로그에 안 남지만
|
||||
# (해당 응답을 기다리는 센서가 없어 기록 경로를 안 탄다), 뒤따르는
|
||||
# 22B002 응답은 그대로 남는다.
|
||||
# raw=62B002… → 성공. 계기판 값이 보정 없이 직접 나온다
|
||||
# negative response 그대로 → 흐름제어도 소용없음. 세션(10 03)으로 한 번 더
|
||||
# 시도해볼 수는 있으나, 위 두 성공 사례 모두 세션 없이 됐다는 점에서
|
||||
# 이 차는 DID 자체가 없을 가능성이 이전보다 높아졌다.
|
||||
- key: odometer_flow_control
|
||||
mode: "22"
|
||||
pid: "B002"
|
||||
pre_commands: ["ATSH7C6", "1003"]
|
||||
pre_commands: ["ATSH7C6", "ATFCSH7C6", "ATFCSD300000", "ATFCSM1"]
|
||||
formula: "g*65536+h*256+i"
|
||||
unit: "km"
|
||||
device_class: distance
|
||||
|
||||
Reference in new issue
Block a user