fix(obd): drop the Accent transmission sensors, which the TCU cannot feed

21 A0 at 7E1 answers on this car, but with nothing in it. Every one of 115
responses in the logs was identical:

    61A0FFFF0000

Four data bytes after the echo, fixed at FF FF 00 00. The awesomeit profile
reads transmission fluid temperature from byte 13, gear position from byte 20
and gear from byte 21, all far past the end of that response, so all three
sensors could never produce a value. decode returning null out of range is
why they stayed blank instead of reporting nonsense.

The profile presumably describes a different trim or transmission than this
car has. Remove the three sensors and record the measured response so this is
not retried.

Sensor count: 11 -> 8.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
This commit is contained in:
eiggerandClaude Opus 5 committed 2026-08-01 22:14:15 +09:00
1 parent 8f6e7b52a6
commit d8ca528a99
1 file changed
+6 -58
+6 -58
View File
@@ -322,64 +322,12 @@ templates:
# 7F 22 22로 거부하므로 다른 DID를 더 뒤져볼 이유가 약하고, 표준 01A6은
# mode 01 지원 목록에 없어 예상대로였다. 위 offset_value 보정을 계속 쓴다.
# ── 변속기(TCU) 21A0 @ 7E1 ────────────────────────────────────────
# awesomeit 엑센트RB 2013 D 1.6 TCI-U2 프로필의 공식 그대로다.
# 오도미터 스캔과는 별개로, 이 블록 자체는 이 차에 존재하는 것으로 알려진
# 값이라 남겨둔다. 스캔은 offset 0~15만 봤고 이 값들은 13·20·21번째라
# 범위 안이었지만 195958과 다른 값(온도·기어)이라 스캔에서 걸러졌을 뿐,
# 응답 자체가 없었는지는 확인되지 않았다. 재임포트 후 값이 안 뜨면
# (NO DATA가 로그에 남으면) 이 3개도 지운다.
# N(byte 13) 미션오일온도, U(byte 20) 기어위치, V(byte 21) 기어단수
- key: trans_oil_temp
mode: "21"
pid: "A0"
pre_commands: ["ATSH7E1"]
formula: "n-40"
unit: "°C"
device_class: temperature
state_class: measurement
accuracy_decimals: 1
icon: mdi:oil-temperature
update_interval: 20s
- key: gear_position
mode: "21"
pid: "A0"
pre_commands: ["ATSH7E1"]
platform: text_sensor
icon: mdi:car-shift-pattern
decode:
offset: 20
length: 1
type: uint8
map:
"8": "D"
"9": "N"
"10": "R"
"11": "P"
"12": "Sport"
"16": "E Mode"
update_interval: 2s
- key: gear
mode: "21"
pid: "A0"
pre_commands: ["ATSH7E1"]
platform: text_sensor
icon: mdi:numeric
decode:
offset: 21
length: 1
type: uint8
map:
"0": "P/N"
"1": "1"
"2": "2"
"3": "3"
"4": "4"
"5": "5"
"6": "6"
"7": "7"
"8": "8"
update_interval: 2s
# 변속기(TCU) 21A0 @ 7E1 은 응답은 하지만 내용이 없다. 실차 확인 결과
# 응답이 61A0FFFF0000 — 에코를 뺀 데이터가 4바이트(FF FF 00 00)뿐이고
# 값도 고정이다. awesomeit 프로필이 이 블록에서 읽는 미션오일온도(byte 13),
# 기어위치(byte 20), 기어단수(byte 21)는 전부 이 범위 밖이라 셋 다
# 영구히 값이 없다. 프로필이 이 차의 다른 트림/사양 기준이었던 것으로 보인다.
# decode 가 범위 밖에서 null 을 돌려주는 덕에 엉뚱한 값이 올라오진 않았다.
- id: gatt_meter_relay
name: "GATT power meter + relay"