perf(obd): loosen polling intervals for slow-changing sensors

hassble-android's OBD loop (fixed in #65, shipped 1.0.9) no longer wakes every
10ms regardless of interval, but the interval itself still sets how much real
BLE traffic goes out — every poll is a write + wait for a genuine response
from the adapter, unlike the old idle-loop overhead which was pure software
busy-checking. Values that don't need sub-minute freshness were still being
polled as often as live telemetry.

Keep rpm and speed at 1s across every template — that immediacy is the point
of installing an OBD gateway. Loosen everything else to match how fast it
actually changes:

  fuel_level            30s -> 60s   (already had a 60s publish min_interval
                                       in two templates; polling faster than
                                       you publish was pure waste)
  cluster_voltage        60s -> 120s  (diagnostic, near-constant)
  gm gear / prnd           1s -> 2s    (still feels live for a dashboard)
  gm oil_pressure          2s -> 5s
  accent intake_temp     10s -> 20s   (thermal mass, slow by nature)
  accent barometric_pressure
                          30s -> 60s   (near-constant while driving)
  accent trans_oil_temp  10s -> 20s
  accent gear / gear_position
                            1s -> 2s
  accent odometer + at_last_dpf_regen + distance_since_dpf_regen
                          60s -> 300s  (no reason for minute-level odometer
                                        freshness, and this is the heaviest
                                        exchange in the config: a 63-byte
                                        multi-frame response, versus a few
                                        bytes for rpm/speed)
  accent odometer_flow_control
                          60s -> 300s  (diagnostic probe, matches the above)

coolant_temp (10s) and oil_pressure's GM preset default were already
reasonable and are unchanged.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
This commit is contained in:
eiggerandClaude Opus 5 committed 2026-07-30 22:54:35 +09:00
1 parent e2c20ac79f
commit 8f6e7b52a6
1 file changed
+18 -16
+18 -16
View File
@@ -83,7 +83,7 @@ templates:
- { key: rpm, preset: rpm, update_interval: 1s } - { key: rpm, preset: rpm, update_interval: 1s }
- { key: speed, preset: speed, update_interval: 1s } - { key: speed, preset: speed, update_interval: 1s }
- { key: coolant_temp, preset: coolant_temp, update_interval: 10s } - { key: coolant_temp, preset: coolant_temp, update_interval: 10s }
- { key: fuel_level, preset: fuel_level, update_interval: 30s } - { key: fuel_level, preset: fuel_level, update_interval: 60s }
- id: obd_gm_extended - id: obd_gm_extended
name: "OBD-II + GM extensions" name: "OBD-II + GM extensions"
@@ -104,11 +104,11 @@ templates:
- { key: coolant_temp, preset: coolant_temp, update_interval: 10s } - { key: coolant_temp, preset: coolant_temp, update_interval: 10s }
- key: fuel_level - key: fuel_level
preset: fuel_level preset: fuel_level
update_interval: 30s update_interval: 60s
publish: { deadband: 0.5, min_interval: 60s } publish: { deadband: 0.5, min_interval: 60s }
- { key: gear, preset: gm_current_gear, update_interval: 1s } - { key: gear, preset: gm_current_gear, update_interval: 2s }
- { key: prnd, preset: gm_prnd_status_alt, update_interval: 1s } - { key: prnd, preset: gm_prnd_status_alt, update_interval: 2s }
- { key: oil_pressure, preset: gm_oil_pressure, update_interval: 2s } - { key: oil_pressure, preset: gm_oil_pressure, update_interval: 5s }
- { key: trans_temp, preset: gm_trans_temp, update_interval: 10s } - { key: trans_temp, preset: gm_trans_temp, update_interval: 10s }
- id: obd_hyundai_kia - id: obd_hyundai_kia
@@ -162,7 +162,7 @@ templates:
state_class: measurement state_class: measurement
accuracy_decimals: 1 accuracy_decimals: 1
icon: mdi:gas-station icon: mdi:gas-station
update_interval: 30s update_interval: 60s
publish: { deadband: 0.5, min_interval: 60s } publish: { deadband: 0.5, min_interval: 60s }
- key: cluster_voltage - key: cluster_voltage
mode: "22" mode: "22"
@@ -174,7 +174,7 @@ templates:
state_class: measurement state_class: measurement
accuracy_decimals: 2 accuracy_decimals: 2
entity_category: diagnostic entity_category: diagnostic
update_interval: 60s update_interval: 120s
- id: obd_hyundai_accent_rb_diesel - id: obd_hyundai_accent_rb_diesel
name: "OBD-II 엑센트(RB) 디젤" name: "OBD-II 엑센트(RB) 디젤"
@@ -206,7 +206,7 @@ templates:
device_class: temperature device_class: temperature
state_class: measurement state_class: measurement
accuracy_decimals: 1 accuracy_decimals: 1
update_interval: 10s update_interval: 20s
- key: barometric_pressure - key: barometric_pressure
mode: "21" mode: "21"
pid: "01" pid: "01"
@@ -216,7 +216,7 @@ templates:
device_class: pressure device_class: pressure
state_class: measurement state_class: measurement
accuracy_decimals: 1 accuracy_decimals: 1
update_interval: 30s update_interval: 60s
# ── 총주행거리 (엔진 ECU의 DPF 블록에 같이 실려 온다) ────────────── # ── 총주행거리 (엔진 ECU의 DPF 블록에 같이 실려 온다) ──────────────
# 엑센트 RB는 계기판(7C6 / 22B002)이 주행거리를 직접 내주지 않는다 — # 엑센트 RB는 계기판(7C6 / 22B002)이 주행거리를 직접 내주지 않는다 —
# 요청하면 7F 22 22. 그래서 대안으로 엔진 ECU의 21 03 블록을 쓴다 # 요청하면 7F 22 22. 그래서 대안으로 엔진 ECU의 21 03 블록을 쓴다
@@ -242,6 +242,8 @@ templates:
# 주행 후 재확인해 두 점으로 완전한 affine 식(scale·offset_value 둘 다)을 # 주행 후 재확인해 두 점으로 완전한 affine 식(scale·offset_value 둘 다)을
# 풀 것 — 아래 odometer_flow_control 이 계기판 값을 직접 준다면 이 보정 # 풀 것 — 아래 odometer_flow_control 이 계기판 값을 직접 준다면 이 보정
# 자체가 필요 없어지므로 그쪽을 먼저 확인한다. # 자체가 필요 없어지므로 그쪽을 먼저 확인한다.
# 오도미터는 분 단위로 갱신될 필요가 없고, 63바이트 멀티프레임이라 짧은
# PID보다 무겁다 — 주기를 늘리는 게 배터리에 가장 크게 도움되는 지점이다.
- key: odometer - key: odometer
mode: "21" mode: "21"
pid: "03" pid: "03"
@@ -252,7 +254,7 @@ templates:
state_class: total_increasing state_class: total_increasing
accuracy_decimals: 1 accuracy_decimals: 1
icon: mdi:counter icon: mdi:counter
update_interval: 60s update_interval: 300s
# 검산용: 재생시점 주행거리 + 재생후 거리 = 총주행거리. # 검산용: 재생시점 주행거리 + 재생후 거리 = 총주행거리.
# 셋 다 같은 카운터를 공유하므로 같은 배율을 적용해야 항등식이 유지된다. # 셋 다 같은 카운터를 공유하므로 같은 배율을 적용해야 항등식이 유지된다.
- key: odometer_at_last_dpf_regen - key: odometer_at_last_dpf_regen
@@ -265,7 +267,7 @@ templates:
state_class: total_increasing state_class: total_increasing
accuracy_decimals: 1 accuracy_decimals: 1
entity_category: diagnostic entity_category: diagnostic
update_interval: 60s update_interval: 300s
- key: distance_since_dpf_regen - key: distance_since_dpf_regen
mode: "21" mode: "21"
pid: "03" pid: "03"
@@ -276,7 +278,7 @@ templates:
state_class: measurement state_class: measurement
accuracy_decimals: 1 accuracy_decimals: 1
entity_category: diagnostic entity_category: diagnostic
update_interval: 60s update_interval: 300s
# ── 계기판 오도미터 재시도: 확장 진단 세션 ───────────────────────── # ── 계기판 오도미터 재시도: 확장 진단 세션 ─────────────────────────
# 위 odometer 는 어디까지나 대체 경로(추정 보정)다. 진짜 계기판 값을 # 위 odometer 는 어디까지나 대체 경로(추정 보정)다. 진짜 계기판 값을
@@ -313,7 +315,7 @@ templates:
state_class: total_increasing state_class: total_increasing
accuracy_decimals: 0 accuracy_decimals: 0
entity_category: diagnostic entity_category: diagnostic
update_interval: 60s update_interval: 300s
# 계기판(22B002)·표준(01A6)·변속기(21A0) 오프셋 0~15 스캔은 195958km와 # 계기판(22B002)·표준(01A6)·변속기(21A0) 오프셋 0~15 스캔은 195958km와
# 일치하는 값을 찾지 못해 제거했다. 계기판은 애초에 22B002 자체를 # 일치하는 값을 찾지 못해 제거했다. 계기판은 애초에 22B002 자체를
@@ -338,7 +340,7 @@ templates:
state_class: measurement state_class: measurement
accuracy_decimals: 1 accuracy_decimals: 1
icon: mdi:oil-temperature icon: mdi:oil-temperature
update_interval: 10s update_interval: 20s
- key: gear_position - key: gear_position
mode: "21" mode: "21"
pid: "A0" pid: "A0"
@@ -356,7 +358,7 @@ templates:
"11": "P" "11": "P"
"12": "Sport" "12": "Sport"
"16": "E Mode" "16": "E Mode"
update_interval: 1s update_interval: 2s
- key: gear - key: gear
mode: "21" mode: "21"
pid: "A0" pid: "A0"
@@ -377,7 +379,7 @@ templates:
"6": "6" "6": "6"
"7": "7" "7": "7"
"8": "8" "8": "8"
update_interval: 1s update_interval: 2s
- id: gatt_meter_relay - id: gatt_meter_relay
name: "GATT power meter + relay" name: "GATT power meter + relay"