Archived
perf(obd): loosen polling intervals for slow-changing sensors
hassble-android's OBD loop (fixed in #65, shipped 1.0.9) no longer wakes every 10ms regardless of interval, but the interval itself still sets how much real BLE traffic goes out — every poll is a write + wait for a genuine response from the adapter, unlike the old idle-loop overhead which was pure software busy-checking. Values that don't need sub-minute freshness were still being polled as often as live telemetry. Keep rpm and speed at 1s across every template — that immediacy is the point of installing an OBD gateway. Loosen everything else to match how fast it actually changes: fuel_level 30s -> 60s (already had a 60s publish min_interval in two templates; polling faster than you publish was pure waste) cluster_voltage 60s -> 120s (diagnostic, near-constant) gm gear / prnd 1s -> 2s (still feels live for a dashboard) gm oil_pressure 2s -> 5s accent intake_temp 10s -> 20s (thermal mass, slow by nature) accent barometric_pressure 30s -> 60s (near-constant while driving) accent trans_oil_temp 10s -> 20s accent gear / gear_position 1s -> 2s accent odometer + at_last_dpf_regen + distance_since_dpf_regen 60s -> 300s (no reason for minute-level odometer freshness, and this is the heaviest exchange in the config: a 63-byte multi-frame response, versus a few bytes for rpm/speed) accent odometer_flow_control 60s -> 300s (diagnostic probe, matches the above) coolant_temp (10s) and oil_pressure's GM preset default were already reasonable and are unchanged. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
This commit is contained in:
1 parent
e2c20ac79f
commit
8f6e7b52a6
1 file changed
+18
-16
+18
-16
@@ -83,7 +83,7 @@ templates:
|
|||||||
- { key: rpm, preset: rpm, update_interval: 1s }
|
- { key: rpm, preset: rpm, update_interval: 1s }
|
||||||
- { key: speed, preset: speed, update_interval: 1s }
|
- { key: speed, preset: speed, update_interval: 1s }
|
||||||
- { key: coolant_temp, preset: coolant_temp, update_interval: 10s }
|
- { key: coolant_temp, preset: coolant_temp, update_interval: 10s }
|
||||||
- { key: fuel_level, preset: fuel_level, update_interval: 30s }
|
- { key: fuel_level, preset: fuel_level, update_interval: 60s }
|
||||||
|
|
||||||
- id: obd_gm_extended
|
- id: obd_gm_extended
|
||||||
name: "OBD-II + GM extensions"
|
name: "OBD-II + GM extensions"
|
||||||
@@ -104,11 +104,11 @@ templates:
|
|||||||
- { key: coolant_temp, preset: coolant_temp, update_interval: 10s }
|
- { key: coolant_temp, preset: coolant_temp, update_interval: 10s }
|
||||||
- key: fuel_level
|
- key: fuel_level
|
||||||
preset: fuel_level
|
preset: fuel_level
|
||||||
update_interval: 30s
|
update_interval: 60s
|
||||||
publish: { deadband: 0.5, min_interval: 60s }
|
publish: { deadband: 0.5, min_interval: 60s }
|
||||||
- { key: gear, preset: gm_current_gear, update_interval: 1s }
|
- { key: gear, preset: gm_current_gear, update_interval: 2s }
|
||||||
- { key: prnd, preset: gm_prnd_status_alt, update_interval: 1s }
|
- { key: prnd, preset: gm_prnd_status_alt, update_interval: 2s }
|
||||||
- { key: oil_pressure, preset: gm_oil_pressure, update_interval: 2s }
|
- { key: oil_pressure, preset: gm_oil_pressure, update_interval: 5s }
|
||||||
- { key: trans_temp, preset: gm_trans_temp, update_interval: 10s }
|
- { key: trans_temp, preset: gm_trans_temp, update_interval: 10s }
|
||||||
|
|
||||||
- id: obd_hyundai_kia
|
- id: obd_hyundai_kia
|
||||||
@@ -162,7 +162,7 @@ templates:
|
|||||||
state_class: measurement
|
state_class: measurement
|
||||||
accuracy_decimals: 1
|
accuracy_decimals: 1
|
||||||
icon: mdi:gas-station
|
icon: mdi:gas-station
|
||||||
update_interval: 30s
|
update_interval: 60s
|
||||||
publish: { deadband: 0.5, min_interval: 60s }
|
publish: { deadband: 0.5, min_interval: 60s }
|
||||||
- key: cluster_voltage
|
- key: cluster_voltage
|
||||||
mode: "22"
|
mode: "22"
|
||||||
@@ -174,7 +174,7 @@ templates:
|
|||||||
state_class: measurement
|
state_class: measurement
|
||||||
accuracy_decimals: 2
|
accuracy_decimals: 2
|
||||||
entity_category: diagnostic
|
entity_category: diagnostic
|
||||||
update_interval: 60s
|
update_interval: 120s
|
||||||
|
|
||||||
- id: obd_hyundai_accent_rb_diesel
|
- id: obd_hyundai_accent_rb_diesel
|
||||||
name: "OBD-II 엑센트(RB) 디젤"
|
name: "OBD-II 엑센트(RB) 디젤"
|
||||||
@@ -206,7 +206,7 @@ templates:
|
|||||||
device_class: temperature
|
device_class: temperature
|
||||||
state_class: measurement
|
state_class: measurement
|
||||||
accuracy_decimals: 1
|
accuracy_decimals: 1
|
||||||
update_interval: 10s
|
update_interval: 20s
|
||||||
- key: barometric_pressure
|
- key: barometric_pressure
|
||||||
mode: "21"
|
mode: "21"
|
||||||
pid: "01"
|
pid: "01"
|
||||||
@@ -216,7 +216,7 @@ templates:
|
|||||||
device_class: pressure
|
device_class: pressure
|
||||||
state_class: measurement
|
state_class: measurement
|
||||||
accuracy_decimals: 1
|
accuracy_decimals: 1
|
||||||
update_interval: 30s
|
update_interval: 60s
|
||||||
# ── 총주행거리 (엔진 ECU의 DPF 블록에 같이 실려 온다) ──────────────
|
# ── 총주행거리 (엔진 ECU의 DPF 블록에 같이 실려 온다) ──────────────
|
||||||
# 엑센트 RB는 계기판(7C6 / 22B002)이 주행거리를 직접 내주지 않는다 —
|
# 엑센트 RB는 계기판(7C6 / 22B002)이 주행거리를 직접 내주지 않는다 —
|
||||||
# 요청하면 7F 22 22. 그래서 대안으로 엔진 ECU의 21 03 블록을 쓴다
|
# 요청하면 7F 22 22. 그래서 대안으로 엔진 ECU의 21 03 블록을 쓴다
|
||||||
@@ -242,6 +242,8 @@ templates:
|
|||||||
# 주행 후 재확인해 두 점으로 완전한 affine 식(scale·offset_value 둘 다)을
|
# 주행 후 재확인해 두 점으로 완전한 affine 식(scale·offset_value 둘 다)을
|
||||||
# 풀 것 — 아래 odometer_flow_control 이 계기판 값을 직접 준다면 이 보정
|
# 풀 것 — 아래 odometer_flow_control 이 계기판 값을 직접 준다면 이 보정
|
||||||
# 자체가 필요 없어지므로 그쪽을 먼저 확인한다.
|
# 자체가 필요 없어지므로 그쪽을 먼저 확인한다.
|
||||||
|
# 오도미터는 분 단위로 갱신될 필요가 없고, 63바이트 멀티프레임이라 짧은
|
||||||
|
# PID보다 무겁다 — 주기를 늘리는 게 배터리에 가장 크게 도움되는 지점이다.
|
||||||
- key: odometer
|
- key: odometer
|
||||||
mode: "21"
|
mode: "21"
|
||||||
pid: "03"
|
pid: "03"
|
||||||
@@ -252,7 +254,7 @@ templates:
|
|||||||
state_class: total_increasing
|
state_class: total_increasing
|
||||||
accuracy_decimals: 1
|
accuracy_decimals: 1
|
||||||
icon: mdi:counter
|
icon: mdi:counter
|
||||||
update_interval: 60s
|
update_interval: 300s
|
||||||
# 검산용: 재생시점 주행거리 + 재생후 거리 = 총주행거리.
|
# 검산용: 재생시점 주행거리 + 재생후 거리 = 총주행거리.
|
||||||
# 셋 다 같은 카운터를 공유하므로 같은 배율을 적용해야 항등식이 유지된다.
|
# 셋 다 같은 카운터를 공유하므로 같은 배율을 적용해야 항등식이 유지된다.
|
||||||
- key: odometer_at_last_dpf_regen
|
- key: odometer_at_last_dpf_regen
|
||||||
@@ -265,7 +267,7 @@ templates:
|
|||||||
state_class: total_increasing
|
state_class: total_increasing
|
||||||
accuracy_decimals: 1
|
accuracy_decimals: 1
|
||||||
entity_category: diagnostic
|
entity_category: diagnostic
|
||||||
update_interval: 60s
|
update_interval: 300s
|
||||||
- key: distance_since_dpf_regen
|
- key: distance_since_dpf_regen
|
||||||
mode: "21"
|
mode: "21"
|
||||||
pid: "03"
|
pid: "03"
|
||||||
@@ -276,7 +278,7 @@ templates:
|
|||||||
state_class: measurement
|
state_class: measurement
|
||||||
accuracy_decimals: 1
|
accuracy_decimals: 1
|
||||||
entity_category: diagnostic
|
entity_category: diagnostic
|
||||||
update_interval: 60s
|
update_interval: 300s
|
||||||
|
|
||||||
# ── 계기판 오도미터 재시도: 확장 진단 세션 ─────────────────────────
|
# ── 계기판 오도미터 재시도: 확장 진단 세션 ─────────────────────────
|
||||||
# 위 odometer 는 어디까지나 대체 경로(추정 보정)다. 진짜 계기판 값을
|
# 위 odometer 는 어디까지나 대체 경로(추정 보정)다. 진짜 계기판 값을
|
||||||
@@ -313,7 +315,7 @@ templates:
|
|||||||
state_class: total_increasing
|
state_class: total_increasing
|
||||||
accuracy_decimals: 0
|
accuracy_decimals: 0
|
||||||
entity_category: diagnostic
|
entity_category: diagnostic
|
||||||
update_interval: 60s
|
update_interval: 300s
|
||||||
|
|
||||||
# 계기판(22B002)·표준(01A6)·변속기(21A0) 오프셋 0~15 스캔은 195958km와
|
# 계기판(22B002)·표준(01A6)·변속기(21A0) 오프셋 0~15 스캔은 195958km와
|
||||||
# 일치하는 값을 찾지 못해 제거했다. 계기판은 애초에 22B002 자체를
|
# 일치하는 값을 찾지 못해 제거했다. 계기판은 애초에 22B002 자체를
|
||||||
@@ -338,7 +340,7 @@ templates:
|
|||||||
state_class: measurement
|
state_class: measurement
|
||||||
accuracy_decimals: 1
|
accuracy_decimals: 1
|
||||||
icon: mdi:oil-temperature
|
icon: mdi:oil-temperature
|
||||||
update_interval: 10s
|
update_interval: 20s
|
||||||
- key: gear_position
|
- key: gear_position
|
||||||
mode: "21"
|
mode: "21"
|
||||||
pid: "A0"
|
pid: "A0"
|
||||||
@@ -356,7 +358,7 @@ templates:
|
|||||||
"11": "P"
|
"11": "P"
|
||||||
"12": "Sport"
|
"12": "Sport"
|
||||||
"16": "E Mode"
|
"16": "E Mode"
|
||||||
update_interval: 1s
|
update_interval: 2s
|
||||||
- key: gear
|
- key: gear
|
||||||
mode: "21"
|
mode: "21"
|
||||||
pid: "A0"
|
pid: "A0"
|
||||||
@@ -377,7 +379,7 @@ templates:
|
|||||||
"6": "6"
|
"6": "6"
|
||||||
"7": "7"
|
"7": "7"
|
||||||
"8": "8"
|
"8": "8"
|
||||||
update_interval: 1s
|
update_interval: 2s
|
||||||
|
|
||||||
- id: gatt_meter_relay
|
- id: gatt_meter_relay
|
||||||
name: "GATT power meter + relay"
|
name: "GATT power meter + relay"
|
||||||
|
|||||||
Reference in new issue
Block a user