From 8243d1e8b8699b344f8290acc3503d360e48ea52 Mon Sep 17 00:00:00 2001 From: eigger Date: Thu, 30 Jul 2026 10:56:01 +0900 Subject: [PATCH] feat(obd): add Accent RB diesel template with an odometer probe MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The Accent does not expose the odometer through the cluster. OBDb's captured command support for real cars records 7C6.7CE.22B002 as unsupported on the 2013, 2015 and 2019 Accent (2018 is the lone exception), which is exactly the 7F 22 22 conditionsNotCorrect this car returns. So obd_hyundai_kia, which is correct for the 35 other HKMC models, cannot work here. Add a template for the Accent RB diesel (1.6 TCI-U2) carrying what is known to work on this car, plus a probe for the remaining unknown: - fuel level as a percentage via standard 012F, recorded as supported on 7E0 for every captured Accent year - intake temperature and barometric pressure from 21 01, taken from the awesomeit profile for this exact model, year and engine - probe_2103, which requests 21 03 purely so the response lands in the app log as raw hex 21 03 on the engine ECU is where OBDb's make-wide HYUNDAI_ODO_V2 lives, at bytes 57-60 divided by 1000. Two neighbouring fields sit in the same frame — the odometer at the last DPF regeneration at bytes 49-52, and the distance driven since that regeneration at bytes 53-56 — and they are distinct values, not the odometer. The awesomeit profile for this car reads bytes 53-55 of the same 21 03 response, so the frame is known to arrive at least that far; the odometer is two bytes beyond. The probe is needed because formula variables only reach byte 19, so byte 57 cannot be addressed yet. Once the raw response confirms the frame length and the value matches the dash, OBD sensors need offset-based decode and the probe can be replaced by a real sensor. Note the exception in obd_hyundai_kia so it points at this template. Co-Authored-By: Claude Opus 5 --- templates.yaml | 67 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 67 insertions(+) diff --git a/templates.yaml b/templates.yaml index cac1e73..22eb81d 100644 --- a/templates.yaml +++ b/templates.yaml @@ -138,6 +138,10 @@ templates: # 출처: OBDb(obdb.community)에서 현대·기아 11개 차종이 동일한 바이트 배치로 확인. # awesomeit Torque 플러그인(35개 차종)·Elantra CN7 PID 목록과도 일치. # 2013년식 이후에서 널리 동작하며, 미지원 차는 NO DATA를 반환한다. + # + # 예외: 엑센트(RB)는 계기판이 이 DID를 열지 않는다. 2013/2015/2019 실차 캡처에서 + # unsupported로 확인됐고 (2018년식만 예외), 요청하면 7F 22 22를 돌려준다. + # 엑센트는 아래 obd_hyundai_accent_rb_diesel 템플릿을 쓸 것. - key: odometer mode: "22" pid: "B002" @@ -172,6 +176,69 @@ templates: entity_category: diagnostic update_interval: 60s + - id: obd_hyundai_accent_rb_diesel + name: "OBD-II 엑센트(RB) 디젤" + description: "RPM, 속도, 연료 %, 흡기온도, 대기압 + 총주행거리 프로브 — 엑센트 RB 1.6 TCI-U2" + device: + id: car_obd_accent + name: "Accent RB Diesel" + source: obd + obd: + service_uuid: "18F0" + tx_char_uuid: "2AF1" + rx_char_uuid: "2AF0" + tx_delay: 50ms + init_commands: ["ATSP6"] + # 아래 ATSH7E0 센서가 있으므로 표준 센서 앞에 ATSH7DF가 자동 삽입된다 + sensors: + - { key: rpm, preset: rpm, update_interval: 1s } + - { key: speed, preset: speed, update_interval: 1s } + # 표준 연료 게이지(%). OBDb 엑센트 실차 캡처에서 2013~2019 전 연식 + # 7E0 supported(012F:FLI)로 확인됨. 계기판 리터 값과 별개 경로다. + - { key: fuel_percent, preset: fuel_level, update_interval: 30s } + # awesomeit 엑센트RB 2013 D 1.6 TCI-U2 프로필에서 확인된 값들 + - key: intake_temp + mode: "21" + pid: "01" + pre_commands: ["ATSH7E0"] + formula: "k*0.980392-50" + unit: "°C" + device_class: temperature + state_class: measurement + accuracy_decimals: 1 + update_interval: 10s + - key: barometric_pressure + mode: "21" + pid: "01" + pre_commands: ["ATSH7E0"] + formula: "j*1.372549" + unit: "kPa" + device_class: pressure + state_class: measurement + accuracy_decimals: 1 + update_interval: 30s + # ── 총주행거리 프로브 (값을 쓰려는 게 아니라 raw 응답을 로그에 남기려는 것) ── + # 엑센트 RB는 계기판(7C6 / 22B002)이 주행거리를 열지 않는다 — 요청하면 7F 22 22. + # 대신 엔진 ECU의 21 03 블록에 있다 (OBDb 메이커 공용 HYUNDAI_ODO_V2): + # byte 49~52 마지막 DPF 재생 시점의 주행거리 /1000 km + # byte 53~56 재생 이후 달린 거리 /1000 km + # byte 57~60 총주행거리 /1000 km ← 목표 + # 셋은 서로 다른 필드다. awesomeit이 "DPF 주행거리"로 부르는 건 byte 53(재생 후 거리). + # 그 프로필이 같은 21 03에서 byte 53~55를 읽으므로, 이 차의 응답은 최소 + # byte 55까지 도착한다 — 목표는 두 바이트 뒤다. + # + # 앱의 formula 변수는 현재 byte 19(t)까지여서 byte 57을 직접 못 읽는다. + # 이 센서는 앱 로그의 raw= hex를 확보하기 위한 것이다. + # hex가 126자(63바이트) 이상이면 byte 57~60이 응답에 들어있다. + # 확인되면 OBD 센서에 offset 기반 decode를 추가해 정식 센서로 교체한다. + - key: probe_2103 + mode: "21" + pid: "03" + pre_commands: ["ATSH7E0"] + formula: "a" + entity_category: diagnostic + update_interval: 30s + - id: gatt_meter_relay name: "GATT power meter + relay" description: "Notify characteristic + switch control example"